I. Executive Summary
This OGC Testbed 19 Engineering Report documents a draft OGC API — GeoDataCube Standard (aka GDC API). The OGC Member participants in this Testbed 19 activity developed, documented, and tested the draft OGC GDC API Standard. The draft will be submitted to the OGC GeoDataCube Standards Working Group (SWG) as a new standards work item.
The OGC GeoDataCube SWG was chartered to respond to the long-standing issue of establishing a standard that supports accessing and processing geospatial datacubes in an interoperable way. The draft OGC API — GeoDataCube that was developed in OGC Testbed 19 responds to this need and proposes a draft API specification.
The Testbed 19 GDC initiative targeted enhanced interoperability. The draft GDC API Standard was based on OGC API — Common, OGC API — Coverages Standard, OGC API — Processes Standard, the STAC API, and the openEO API. The Testbed 19 participants concentrated on server and client application development, and usability testing based on conformance classes and use cases. The draft GDC API is defined as an OpenAPI 3.0 document and provides endpoints for capabilities, data discovery/access, process discovery, and data processing. Notably, the draft GDI API Standard is extensible through additional implementations of OGC API Standards or openEO API parts. Documentation is available in machine-readable YAML and human-friendly HTML through a GitHub repository.
NOTE: In this document, any occurrence of the phrase “GDC API” means and can be expanded to “draft OGC API — GeoDataCube Standard”.
II. Keywords
The following are keywords to be used by search engines and document catalogues.
geographic, data cubes, api
III. Contributors
All questions regarding this document should be directed to the editor or the contributors:
| Name | Organization | Role |
|---|---|---|
| Matthias Mohr | Eurac Research | Editor |
| Alexander Jacob | Eurac Research | Contributor |
1. Introduction
Over the past decade, GeoDataCubes were developed independently, resulting in a lack of interoperability between different implementations. By improving interoperability, the vendor community will be able to proceed with specific GeoDataCube variants that meet specific community requirements. At the same time the consumer community will be able to interact much more effectively with different implementation instances.
The OGC Geodatacube Standards Working Group was formed in 2023 and the Testbed 19 work was designed to provide initial input to the work of the SWG. Testbed 19 focused on the development of a draft GeoDataCube API, and the development of a number of client and server applications for data access, visualization, and processing. Three use cases were used to test the implementations. Usability tests ensured that the draft GeoDatacCube API Standard deployed in developed software was user-friendly. See the corresponding Engineering Report for details about client implementations, server implementations, use cases, and usability tests.
2. Geodatacube API Draft Specification
The draft GDC API Standard is defined as a RESTful Web API utilizing JSON and HTTP that provides access to geospatial data cubes and related metadata. The draft is based on multiple other API standards and specifications that provide the building blocks for the GDC API. The following list provides a brief description of the building blocks.
OGC API — Common — Part 1 & 2 (required)
OGC API — Coverages — Part 1 (required)
OGC API — Processes — Part 1 (optional)
STAC API, which is based on OGC API — Features — Part 1 (optional)
openEO API (optional)
The following list groups the GDC API endpoints and maps the endpoints to the OGC, STAC, and openEO building blocks endpoints are based on.
Capabilities: OGC API — Common — Part 1, openEO API
Data Discovery / Access: OGC API — Common — Part 2, OGC API — Coverages — Part 1, STAC API
Process Discovery: OGC API — Processes — Part 1, openEO API
Data Processing: OGC API — Processes — Part 1, openEO API
Please note that although most of the documents listed above are published and stable specifications or standards, the OGC API — Coverages standard is in draft and will likely change before its final publication.
The GDC API document highlights whenever two API building blocks, e.g., from the openEO API and OGC API — Processes, share the same endpoint and explains how the endpoints can be combined. The draft standard also provides information on how to distinguish the elements returned by an API endpoint so that the elements can be identified as belonging to one of the respective building blocks.
The GDC API can be extended with additional functionality by implementing additional parts of the OGC API Standards suite or the openEO API.
The GDC API is specified using the OpenAPI 3.0 standard. The specification document can be found here in machine-readable format (OpenAPI 3.0, YAML):
https://raw.githubusercontent.com/m-mohr/geodatacube-api/master/openapi.yaml;
or in Appendix B of this document.
The draft GDC API is also available rendered as HTML in a more human-friendly format:
The GitHub repository that contains the GDI API is available here:
Annex A
(normative)
Abbreviations/Acronyms
API
Application Programming Interface
JSON
JavaScript Object Notation
HTML
HyperText Markup Language
STAC
SpatioTemporal Asset Catalog
YAML
Yet Another Markup Language
Annex B
(normative)
Geodatacube API as OpenAPI specification
openapi: 3.0.2
info:
title: geodatacube API
version: 1.0.0-beta
description: |-
The geodatacube API specification for interoperable cloud-based processing of large Earth observation datacubes.
**Conformance class**: `https://api.geodatacube.example/1.0.0-beta`
# API Principles
## Language
In the specification the key words “MUST,” “MUST NOT,” “REQUIRED,” “SHALL,” “SHALL NOT,” “SHOULD,” “SHOULD NOT,” “RECOMMENDED,” “MAY,” and “OPTIONAL” in this document are to be interpreted as described in [RFC 2119](https://www.rfc-editor.org/rfc/rfc2119.html) and [RFC 8174](https://www.rfc-editor.org/rfc/rfc8174.html).
## Casing
Unless otherwise stated the API works **case sensitive**.
All names SHOULD be written in snake case, i.e., words are separated with one underscore character (`_`) and no spaces, with all letters lower-cased. Example: `hello_world`. This applies particularly to endpoints and JSON property names. HTTP header fields are generally case-insensitive according to [RFC 7230](https://www.rfc-editor.org/rfc/rfc7230.html#section-3.2) and in the specification the user should follow the header fields' respective casing conventions, e.g., `Content-Type` or `GDC-Identifier`, for better readability and consistency.
## HTTP / REST
This uses [HTTP REST](https://en.wikipedia.org/wiki/Representational_state_transfer) [Level 2](https://martinfowler.com/articles/richardsonMaturityModel.html#level2) for communication between client and back-end server.
Public APIs MUST be available via HTTPS only.
Endpoints are made to use meaningful HTTP verbs (e.g., GET, POST, PUT, PATCH, DELETE) whenever technically possible. If there is a need to transfer big chunks of data for a GET requests to the back-end, POST requests MAY be used as a replacement as POST requests support sending data via request body. Unless otherwise stated, PATCH requests are only defined to work on direct (first-level) children of the full JSON object. Therefore, changing a property on a deeper level of the full JSON object always requires sending the whole JSON object defined by the first-level property.
Naming of endpoints follows the REST principles. Therefore, endpoints are centered around resources. Resource identifiers MUST be named with a noun in plural form except for single actions that can not be modeled with the regular HTTP verbs. Single actions MUST be single endpoints with a single HTTP verb (POST is RECOMMENDED) and no other endpoints beneath it.
The API makes use of [HTTP Content Negotiation](https://www.rfc-editor.org/rfc/rfc9110.html#name-content-negotiation),
including, but not limited to, the request headers `Accept`, `Accept-Charset`, and `Accept-Language`.
### JSON
The API uses JSON for request and response bodies whenever feasible. Services use JSON as the default encoding. Other encodings can be requested using HTTP Content Negotiation ([`Accept` header](https://www.rfc-editor.org/rfc/rfc9110.html#name-accept)). Clients and servers MUST NOT rely on the order in which properties appear in JSON. To keep the response size small, lists of resources (e.g., the list of batch jobs) usually should not include nested JSON objects, if this information can be requested from the individual resource endpoints (e.g., the metadata for a single batch job).
### Charset
Services use [UTF-8](https://en.wikipedia.org/wiki/UTF-8) as the default charset if not negotiated otherwise with HTTP Content Negotiation ([`Accept-Charset` header](https://www.rfc-editor.org/rfc/rfc9110.html#name-accept-charset)).
## Web Linking
The API is designed in a way that to most entities (e.g., collections and processes) a set of links can be added. These can be alternate representations, e.g., data discovery via OGC WCS or OGC CSW, references to a license, references to actual raw data for downloading, detailed information about pre-processing, and more. Clients should allow users to follow the links.
Whenever links are utilized in the API, the description explains which relation (`rel` property) types are commonly used.
A [list of standardized link relations types is provided by IANA](https://www.iana.org/assignments/link-relations/link-relations.xhtml) and the API tries to align whenever feasible.
Some very common relation types - usually not mentioned explicitly in the description of `links` fields - are as follows.
1. `self`: which allows link to the location that the resource can be (permanently) found online.This is particularly useful when the data are made available offline, so that the downstream user knows where the data have come from.
2. `alternate`: An alternative representation of the resource, may it be another metadata standard the data are available in or simply a human-readable version in HTML or PDF.
3. `about`: A resource that is related or further explains the resource, e.g., a user guide.
4. `canonical`: This relation type usually points to a publicly accessible and more long-lived URL for a resource that otherwise often requires (Bearer) authentication with a short-lived token.
This way the the exposed resources can be used by clients without additional authentication steps.
For example, a shared user-defined process or batch job results could be exposed via a canonical link.
If a URL should be publicly available to everyone, it can simply be a user-specific URL, e.g., `https://geodatacube.example/processes/john_doe/ndvi`.
For resources that should only be accessible to a certain group of user, a signed URL could be given, e.g., `https://geodatacube.example/processes/81zjh1tc2pt52gbx/ndvi`.
Generally, it is RECOMMENDED to add descriptive titles (property `title`) and media type information (property `type`) for a better user experience.
## Error Handling
The success of requests MUST be indicated using [HTTP status codes](https://www.rfc-editor.org/rfc/rfc7231.html#section-6) according to [RFC 7231](https://www.rfc-editor.org/rfc/rfc7231.html).
If the API responds with a status code between 100 and 399 the back-end indicates that the request has been handled successfully.
In general, an error is communicated with a status code between 400 and 599. Client errors are defined as a client passing invalid data to the service and the service *correctly* rejecting those data. Examples include invalid credentials, incorrect parameters, unknown versions, or similar. These are generally "4xx" HTTP error codes and are the result of a client passing incorrect or invalid data. Client errors do *not* contribute to overall API availability.
Server errors are defined as the server failing to correctly return in response to a valid client request. These are generally "5xx" HTTP error codes. Server errors *do* contribute to the overall API availability. Calls that fail due to rate limiting or quota failures MUST NOT count as server errors.
### JSON error object
A JSON error object SHOULD be sent with all responses that have a status code between 400 and 599.
``` json
{
"id": "936DA01F-9ABD-4D9D-80C7-02AF85C822A8",
"code": "SampleError",
"message": "A sample error message.",
"url": "https://geodatacube.example/docs/errors/SampleError"
}
```
Sending `code` and `message` is REQUIRED.
* A back-end MAY add a free-form `id` (unique identifier) to the error response to be able to log and track errors with further non-disclosable details.
* The `code` is proprietary textual error code.
* The `message` explains the reason the server is rejecting the request. For "4xx" error codes the message explains how the client needs to modify the request.
By default the message MUST be sent in the English language. Content Negotiation is used to localize the error messages: If an `Accept-Language` header is sent by the client and a translation is available, the message should be translated accordingly and the `Content-Language` header must be present in the response. See "[How to localize your API](http://apiux.com/2013/04/25/how-to-localize-your-api/)" for more information.
* `url` is an OPTIONAL attribute and contains a link to a resource that explains the error and potential solutions in-depth.
### Standardized status codes
The API usually uses the following HTTP status codes for successful requests as follows.
- **200 OK**:
Indicates a successful request **with** a response body being sent.
- **201 Created**
Indicates a successful request that successfully created a new resource and sends a `Location` header to the newly created resource **without** a response body.
- **202 Accepted**
Indicates a successful request that successfully queued the creation of a new resource, but it has not been created yet. The response is sent **without** a response body.
- **204 No Content**:
Indicates a successful request **without** a response body being sent.
The API has some commonly used HTTP status codes for failed requests as follows.
- **400 Bad Request**:
The back-end responds with this error code whenever the error has its origin on client side and no other HTTP status code in the 400 range is suitable.
- **401 Unauthorized**:
The client did not provide any authentication details for a resource requiring authentication or the provided authentication details are not correct.
- **403 Forbidden**:
The client did provided correct authentication details, but the privileges/permissions of the provided credentials do not allow to request the resource.
- **404 Not Found**:
The resource specified by the path does not exist, i.e., one of the resources belonging to the specified identifiers is not available at the back-end.
*Note:* Unsupported endpoints MAY also return HTTP status code 501.
- **500 Internal Server Error**:
The error has its origin on server side and no other status code in the 500 range is suitable.
- **501 Not Implemented**:
The requested endpoint is part of the API specification, but is not implemented (yet) by the back-end.
*Note:* Unsupported endpoints MAY also return HTTP status code 404.
If a HTTP status code in the 400 range is returned, the client SHOULD NOT repeat the request without modifications. For HTTP status code in the 500 range, the client MAY repeat the same request later.
All HTTP status codes defined in RFC 7231 in the 400 and 500 ranges can be used as error codes in addition to the most used status codes mentioned here. Responding with error codes 400 and 500 SHOULD be avoided in favor of any more specific standardized or proprietary error codes.
## Temporal data
Date, time, intervals and durations are formatted based on ISO 8601 or its profile [RFC 3339](https://www.rfc-editor.org/rfc/rfc3339.html) whenever there is an appropriate encoding available in the standard. All temporal data are specified based on the Gregorian calendar.
# Authentication
The API offers two forms of authentication by default:
* Basic at `GET /credentials/basic`
* OpenID Connect at `GET /credentials/oidc`
After authentication with any of the methods listed above, the tokens obtained during the authentication workflows can be sent to protected endpoints in subsequent requests.
Further authentication methods MAY be added by back-ends.
<SecurityDefinitions />
**Note:** Although it is possible to request several public endpoints for capabilities and discovery that don't require authorization, it is RECOMMENDED that clients (re-)request the public endpoints that support Bearer authentication with the Bearer token once available to also retrieve any private data that are made available specifically for the authenticated user.
This may require that clients clear any cached data retrieved from public endpoints.
# Cross-Origin Resource Sharing (CORS)
> Cross-origin resource sharing (CORS) is a mechanism that allows restricted resources [...] on a web page to be requested from another domain outside the domain from which the first resource was served. [...]
> CORS defines a way in which a browser and server can interact to determine whether or not it is safe to allow the cross-origin request, allowing for more freedom and functionality than purely same-origin requests, but being more secure than simply allowing all cross-origin requests.
Source: [https://en.wikipedia.org/wiki/Cross-origin_resource_sharing](https://en.wikipedia.org/wiki/Cross-origin_resource_sharing)
Geodatacube-API-based back-ends are usually hosted on a different domain/host than the client that is requesting data from the back-end. Therefore most requests to the back-end are blocked by all modern browsers. This leads to the problem that the JavaScript library and any browser-based application cannot access back-ends. Therefore, all back-end providers SHOULD support CORS to enable browser-based applications to access back-ends. [CORS is a recommendation of the W3C organization](https://www.w3.org/TR/cors/). The following chapters will explain how back-end providers can implement CORS support.
**Tip**: Most servers can send the required headers and the responses to the OPTIONS requests automatically for all endpoints. Otherwise the user may also use a proxy server to add the headers and OPTIONS responses.
## CORS headers
The following headers MUST be included with every response:
| Name | Description | Example |
| -------------------------------- | ------------------------------------------------------------ | ------- |
| Access-Control-Allow-Origin | Allowed origin for the request, including protocol, host and port or `*` for all origins. It is RECOMMENDED to return the value `*` to allow requests from browser-based implementations. | `*` |
| Access-Control-Expose-Headers | Some endpoints require sending additional HTTP response headers such as `GDC-Identifier` and `Location`. To make these headers available to browser-based clients, they MUST be white-listed with this CORS header. The following HTTP headers are white-listed by browsers and MUST NOT be included: `Cache-Control`, `Content-Language`, `Content-Length`, `Content-Type`, `Expires`, `Last-Modified` and `Pragma`. At least the following headers MUST be listed in this version of the API: `Link`, `Location`, and `GDC-Identifier`. | `Link, Location, GDC-Identifier` |
### Example request and response
Request:
```http
POST /api/v1/jobs HTTP/1.1
Host: geodatacube.example
Origin: https://company.example:8080
Authorization: Bearer basic//ZXhhbXBsZTpleGFtcGxl
```
Response:
```http
HTTP/1.1 201 Created
Access-Control-Allow-Origin: *
Access-Control-Expose-Headers: Location, GDC-Identifier, Link
Content-Type: application/json
Location: https://geodatacube.example/api/v1/jobs/abc123
GDC-Identifier: abc123
```
## OPTIONS method
All endpoints must respond to the `OPTIONS` HTTP method. This is a response for the preflight requests made by web browsers before sending the actual request (e.g., `POST /jobs`) and needs to respond with a status code of `204` and no response body.
**In addition** to the HTTP headers shown in the table above, the following HTTP headers MUST be included with every response to an `OPTIONS` request:
| Name | Description | Example |
| -------------------------------- | ------------------------------------------------------------ | ------- |
| Access-Control-Allow-Headers | Comma-separated list of HTTP headers allowed to be sent with the actual (non-preflight) request MUST contain at least `Authorization` if any kind of authorization is implemented by the back-end. | `Authorization, Content-Type` |
| Access-Control-Allow-Methods | Comma-separated list of HTTP methods allowed to be requested. Back-ends MUST list all implemented HTTP methods for the endpoint. | `OPTIONS, GET, POST, PATCH, PUT, DELETE` |
| Content-Type | SHOULD return the content type delivered by the request that the permission is requested for. | `application/json` |
### Example request and response
Request:
```http
OPTIONS /api/v1/jobs HTTP/1.1
Host: geodatacube.example
Origin: https://company.example:8080
Access-Control-Request-Method: POST
Access-Control-Request-Headers: Authorization, Content-Type
```
Note that the `Access-Control-Request-*` headers are automatically attached to the requests by the browsers.
Response:
```http
HTTP/1.1 204 No Content
Access-Control-Allow-Origin: *
Access-Control-Allow-Methods: OPTIONS, GET, POST, PATCH, PUT, DELETE
Access-Control-Allow-Headers: Authorization, Content-Type
Access-Control-Expose-Headers: Location, GDC-Identifier, Link
Content-Type: application/json
```
contact:
name: OGC Testbed 19
url: 'https://www.ogc.org/initiatives/t-19/'
email: info@ogc.org
license:
name: Apache 2.0
url: 'http://www.apache.org/licenses/LICENSE-2.0.html'
tags:
- name: Capabilities
description: General information about the API implementation and other supported capabilities at the back-end.
- name: Account Management
description: |-
The following endpoints handle authentication and basic user profiles. See also [Authentication](#section/Authentication). In general, the API only defines a minimum subset of account management. It allows to [authenticate and authorize](http://www.differencebetween.net/technology/difference-between-authentication-and-authorization/) a user, which may include [user registration with OpenID Connect](http://openid.net/specs/openid-connect-registration-1_0.html),
For accounting, quota handling and similar functionality one may explore the openEO API.
Therefore, the API leaves some aspects open that have to be handled by the back-ends separately, including:
* credentials recovery, e.g., retrieving a forgotten password;
* user data management, e.g., changing the users payment details or email address;
* payments, i.e., topping up credits for pre-paid services or paying for post-paid services;
* accounting related tasks, e.g., processing costs and creating invoices; and
* user registration (except for [user registration with OpenID Connect](http://openid.net/specs/openid-connect-registration-1_0.html)).
- name: Data Discovery / Access
description: |-
These endpoints allow listing the collections that are available at the back-end and can be used as data cubes for data processing. It builds on top of:
- OGC API - Coverages - Part 1
- STAC API (incl. STAC Data Cube extension)
- name: OGC API - Coverages
description: Data access through OGC API - Coverages - Part 1 (v0.0.2)
- name: OGC API - Features / STAC API
description: >-
**OPTIONAL.** Data access through OGC API - Features - Part 1 (v1.0.0) and STAC API (v1.0.0)
- name: Process Discovery
description: |-
**OPTIONAL.** These endpoints allow listing the predefined processes that are available at the back-end. To list user-defined processes see 'openEO - User-Defined Processes'.
- name: OGC API - Processes
description: >-
**OPTIONAL.** Data processing through OGC API - Processes - Part 1 (v1.0.0)
- name: openEO
description: >-
**OPTIONAL.** Data processing through openEO (v1.2.0)
- name: openEO - User-Defined Processes
description: >-
**OPTIONAL.** These endpoints allow storing and managing user-defined processes with process graphs at the back-end.
- name: openEO - Secondary Services (OGC APIs)
description: >-
**OPTIONAL.** On-demand access to data using other web service protocols (e.g., OGC API - Tiles / Maps).
servers:
- url: 'https://geodatacube.example/api'
description: >-
The URL of the API MAY freely be chosen by the back-end providers.
Nevertheless, all servers MUST support HTTPS as the authentication methods
are not secure with HTTP only!
paths:
/:
get:
summary: Information about the back-end
operationId: capabilities
description: >-
Lists general information about the back-end, including which version
and endpoints of the geodatacube API are supported. May also include billing
information.
tags:
- Capabilities
security:
- {}
responses:
'200':
description: |-
Information about the API version and supported endpoints/features.
This endpoint MUST always be available for the API to be valid.
content:
application/json:
schema:
title: Capabilities
type: object
required:
- id
- title
- description
- gdc_version
- endpoints
- links
properties:
gdc_version:
type: string
description: >-
Version number of the geodatacube API specification this back-end
implements.
enum:
- 1.0.0-beta
backend_version:
type: string
description: >-
Version number of the back-end implementation.
Every change on the back-end side MUST cause a change of the
version number.
example: 1.1.2
stac_version:
$ref: '#/components/schemas/stac_version'
api_version:
type: string
description: >-
If the openEO API is implemented: Version number of the openEO API specification this back-end
implements.
example: 1.2.0
type:
type: string
enum:
- Catalog
description: >-
For STAC versions >= 1.0.0-rc.1 this field is required.
example: Catalog
id:
type: string
description: >-
Identifier for the service.
This field originates from STAC and is used as a unique identifier for the STAC catalog available at `/collections`.
example: cool-eo-cloud
title:
type: string
description: The name of the service.
example: Example Cloud Corp.
description:
type: string
format: commonmark
description: >-
A description of the service, which allows the service
provider to introduce the user to its service.
[CommonMark 0.29](http://commonmark.org/) syntax MAY be
used for rich text representation.
example: |-
This service is provided by [Example Cloud Corp.](https://cloud.example) and implements the full geodatacube API and allows processing a range of 999 EO data sets, including:
* Sentinel 1/2/3 and 5; and
* Landsat 7/8.
A free plan is available to test the service. For further information please contact customer service at [support@cloud.example](mailto:support@cloud.example).
conformsTo:
$ref: '#/components/schemas/conformsTo'
endpoints:
type: array
description: >-
Lists all supported endpoints. Supported are all
endpoints, which are implemented, usually return
a 2XX or 3XX HTTP status code and are fully compatible
to the API specification.
An entry for this endpoint (path `/` with method `GET`)
SHOULD NOT be listed.
Each path MUST only be listed once in the array.
items:
title: Endpoint
type: object
required:
- path
- methods
properties:
path:
description: >-
Path to the endpoint, relative to the URL of this
endpoint. In general the paths MUST follow the paths
specified in the openAPI specification as closely as
possible. Therefore, paths MUST be prepended with a
leading slash, but MUST NOT contain a trailing
slash. Variables in the paths MUST be placed in
curly braces and follow the parameter names in the
openAPI specification, e.g., `{job_id}`.
type: string
methods:
description: >-
Supported HTTP verbs in uppercase. It is OPTIONAL to
list `OPTIONS` as method (see the [CORS section](#section/Cross-Origin-Resource-Sharing-(CORS))).
type: array
items:
type: string
enum:
- GET
- POST
- PATCH
- PUT
- DELETE
- OPTIONS
example:
- path: /collections
methods:
- GET
- path: '/collections/{collection_id}'
methods:
- GET
- path: /processes
methods:
- GET
- path: /jobs
methods:
- GET
- POST
- path: '/jobs/{job_id}'
methods:
- GET
- DELETE
- PATCH
links:
description: |-
Links related to this service, e.g., the homepage of
the service provider or the terms of service.
1. `terms-of-service` (optional): A link to the terms of service. If
a back-end provides a link to the terms of service, the
clients MUST provide a way to read the terms of service
and only connect to the back-end after the user has agreed to
terms. The user interface MUST be designed in a way that
the terms of service are not agreed to by default, i.e.,
the user MUST explicitly agree to the terms.
2. `privacy-policy` (optional): A link to the privacy policy (GDPR).
If a back-end provides a link to a privacy policy, the
clients MUST provide a way to read the privacy policy and
only connect to the back-end after the user has agreed to the
policy. The user interface MUST be designed in a way that
the privacy policy is not agreed to by default, i.e., the
user MUST explicitly agree to the policy.
3. `service-desc` (required) and `service-doc` (optional):
A link to the API definition.
Use `service-desc` for machine-readable API definition and
`service-doc` for human-readable API definition.
4. `http://www.opengis.net/def/rel/ogc/1.0/conformance` (required):
A link to the Conformance declaration (see `/conformance`).
5. `data` (required): A link to the collections (see `/collections`).
6. `create-form` (optional): A link to a user registration page.
7. `recovery-form` (optional): A link to a page where a user can
recover a user account (e.g., to reset the password or send
a reminder about the username to the user's email account).
For additional relation types see also the lists of
[common relation types](#section/API-Principles/Web-Linking).
type: array
items:
$ref: '#/components/schemas/link'
example:
- href: 'https://cloud.example'
rel: about
type: text/html
title: Homepage of the service provider
- href: 'https://cloud.example/tos'
rel: terms-of-service
type: text/html
title: Terms of Service
- href: 'https://cloud.example/privacy'
rel: privacy-policy
type: text/html
title: Privacy Policy
- href: 'https://cloud.example/register'
rel: create-form
type: text/html
title: User Registration
- href: 'https://cloud.example/lost-password'
rel: recovery-form
type: text/html
title: Reset Password
- href: 'https://cloud.example/api/v1/conformance'
rel: http://www.opengis.net/def/rel/ogc/1.0/conformance
type: application/json
title: OGC Conformance Classes
- href: 'https://cloud.example/api/v1/openapi.json'
rel: service-desc
type: application/vnd.oai.openapi+json;version=3.0
title: OpenAPI 3.0 description of the API
- href: 'https://cloud.example/api/v1/collections'
rel: data
type: application/json
title: List of Datasets
4XX:
$ref: '#/components/responses/client_error'
5XX:
$ref: '#/components/responses/server_error'
/file_formats:
get:
summary: Supported file formats
operationId: list-file-types
description: |-
Lists supported input and output file formats.
*Input* file formats specify which file a back-end can *read* from.
*Output* file formats specify which file a back-end can *write* to.
The response to this request is an object listing all available input
and output file formats separately with associated parameters and additional
data. This endpoint does not include the supported secondary web
services.
**Note**: Format names and parameters MUST be fully aligned with the
GDAL codes if available, see [GDAL Raster
Formats](https://gdal.org/drivers/raster/index.html) and [OGR Vector
Formats](https://gdal.org/drivers/vector/index.html). It is OPTIONAL to
support all output format parameters supported by GDAL. Some file
formats not available through GDAL may be defined centrally for the geodatacube.
Custom file formats or parameters MAY be defined.
The format descriptions must describe how the file formats relate to
data cubes. Input file formats must describe how the files have to be
structured to be transformed into data cubes. Output file formats must
describe how the data cubes are stored at the back-end and how the
resulting file structure looks like.
Back-ends MUST NOT support aliases, for example it is not allowed to
support `geotiff` instead of `gtiff`. Nevertheless, geodatacube clients MAY
translate user input input for convenience (e.g., translate `geotiff` to
`gtiff`). Also, for a better user experience the back-end can specify a
`title`.
Format names MUST be accepted in a *case insensitive* manner throughout the API.
tags:
- openEO
security:
- {}
- Bearer: []
responses:
'200':
description: >-
An object with containing all input and output format separately.
For each property `input` and `output` an object is defined where
the file format names are the property keys and the property values
are objects that define a title, supported parameters and related
links.
content:
application/json:
schema:
title: File Formats
type: object
required:
- input
- output
properties:
input:
title: Input File Formats
type: object
description: >-
Map of supported input file formats, i.e., file formats a
back-end can **read** from. The property keys are the file
format names that are used by clients and users, for
example in process graphs.
additionalProperties:
$ref: '#/components/schemas/file_format'
output:
title: Output File Formats
type: object
description: >-
Map of supported output file formats, i.e., file formats a
back-end can **write** to. The property keys are the file
format names that are used by clients and users, for
example in process graphs.
additionalProperties:
$ref: '#/components/schemas/file_format'
example:
output:
GTiff:
title: GeoTiff
description: Export to GeoTiff. Doesn't support cloud-optimized GeoTiffs (COGs) yet.
gis_data_types:
- raster
parameters:
tiled:
type: boolean
description: >-
This option can be used to force creation of tiled
TIFF files [true]. By default [false] stripped TIFF
files are created.
default: false
compress:
type: string
description: Set the compression to use.
default: NONE
enum:
- JPEG
- LZW
- DEFLATE
- NONE
jpeg_quality:
type: integer
description: Set the JPEG quality when using JPEG.
minimum: 1
maximum: 100
default: 75
links:
- href: 'https://gdal.org/drivers/raster/gtiff.html'
rel: about
title: GDAL on the GeoTiff file format and storage options
GPKG:
title: OGC GeoPackage
gis_data_types:
- raster
- vector
parameters:
version:
type: string
description: >-
Set GeoPackage version. In AUTO mode, this will be
equivalent to 1.2 starting with GDAL 2.3.
enum:
- auto
- '1'
- '1.1'
- '1.2'
default: auto
links:
- href: 'https://gdal.org/drivers/raster/gpkg.html'
rel: about
title: GDAL on GeoPackage for raster data
- href: 'https://gdal.org/drivers/vector/gpkg.html'
rel: about
title: GDAL on GeoPackage for vector data
input:
GPKG:
title: OGC GeoPackage
gis_data_types:
- raster
- vector
parameters:
table:
type: string
description: >-
**RASTER ONLY.** Name of the table containing the
tiles. If the GeoPackage dataset only contains one
table, this option is not necessary. Otherwise, it
is required.
links:
- href: 'https://gdal.org/drivers/raster/gpkg.html'
rel: about
title: GDAL on GeoPackage for raster data
- href: 'https://gdal.org/drivers/vector/gpkg.html'
rel: about
title: GDAL on GeoPackage for vector data
4XX:
$ref: '#/components/responses/client_error'
5XX:
$ref: '#/components/responses/server_error'
/conformance:
get:
summary: Conformance classes this API implements
operationId: conformance
description: |-
Lists all conformance classes specified in various standards that the
implementation conforms to. Conformance classes are commonly used in
all OGC APIs and the STAC API specification.
The conformance classes listed at this endpoint and listed in the
corresponding `conformsTo` property in `GET /` MUST be equal.
More details:
- [STAC API](https://github.com/radiantearth/stac-api-spec), especially the conformance class "STAC API - Collections"
- [OGC APIs](https://ogcapi.ogc.org/)
tags:
- Capabilities
responses:
'200':
description: The URIs of all conformance classes supported by the server.
content:
application/json:
schema:
title: OGC Conformance Classes
type: object
required:
- conformsTo
properties:
conformsTo:
$ref: '#/components/schemas/conformsTo'
5XX:
$ref: '#/components/responses/server_error'
/collections:
get:
summary: Basic metadata for all datasets
operationId: list-collections
description: |-
Lists available collections with at least the required information.
It is **strongly RECOMMENDED** to keep the response size small by
omitting larger optional values from the objects in `collections` (e.g., the
STAC `summaries` and `cube:dimensions` properties).
To get the full metadata for a collection clients MUST
request `GET /collections/{collection_id}`.
Note: Although it is possible to request public collections without
authorization, it is RECOMMENDED that clients (re-)request the collections
with the Bearer token once available to also retrieve any private collections.
**NOTE:** This endpoint may return collections from STAC API / openEO API and OGC API - Coverages.
Distinguish them via the `stac_version` property which is always present for STAC API / openEO API, but not for OGC API - Coverages.
tags:
- Data Discovery / Access
security:
- {}
- Bearer: []
parameters:
- $ref: '#/components/parameters/pagination_limit'
responses:
'200':
description: Lists of collections and related links.
content:
application/json:
schema:
title: Collections
type: object
required:
- collections
- links
properties:
collections:
type: array
items:
allOf:
- $ref: '#/components/schemas/collection'
anyOf:
- title: Coverage Collection
- $ref: '#/components/schemas/stac_collection'
links:
$ref: '#/components/schemas/links_pagination'
example:
collections:
- stac_version: 1.0.0
type: Collection
id: Sentinel-2A
title: Sentinel-2A MSI L1C
description: >-
Sentinel-2A is a wide-swath, high-resolution,
multi-spectral imaging mission supporting Copernicus
Land Monitoring studies, including the monitoring of
vegetation, soil and water cover, as well as observation
of inland waterways and coastal areas.
license: proprietary
extent:
spatial:
bbox:
- - -180
- -56
- 180
- 83
temporal:
interval:
- - '2015-06-23T00:00:00Z'
- '2019-01-01T00:00:00Z'
keywords:
- copernicus
- esa
- msi
- sentinel
providers:
- name: European Space Agency (ESA)
roles:
- producer
- licensor
url: >-
https://sentinel.esa.int/web/sentinel/user-guides/sentinel-2-msi
- name: Google Earth Engine
roles:
- host
url: >-
https://developers.google.com/earth-engine/datasets/catalog/COPERNICUS_S2
links:
- rel: license
href: >-
https://scihub.copernicus.eu/twiki/pub/SciHubWebPortal/TermsConditions/Sentinel_Data_Terms_and_Conditions.pdf
- stac_version: 1.0.0
type: Collection
id: MOD09Q1
title: >-
MODIS/Terra Surface Reflectance 8-Day L3 Global 250m SIN
Grid V006
description: >-
The MOD09Q1 Version 6 product provides an estimate of
the surface spectral reflectance of Terra MODIS Bands
1-2 corrected for atmospheric conditions such as gasses,
aerosols, and Rayleigh scattering. Provided along with
the two 250 m MODIS bands is one additional layer, the
Surface Reflectance QC 250 m band. For each pixel, a
value is selected from all the acquisitions within the
8-day composite period. The criteria for the pixel
choice include cloud and solar zenith. When several
acquisitions meet the criteria the pixel with the
minimum channel 3 (blue) value is used. Validation at
stage 3 has been achieved for all MODIS Surface
Reflectance products.
license: proprietary
extent:
spatial:
bbox:
- - -180
- -90
- 180
- 90
temporal:
interval:
- - '2000-02-01T00:00:00Z'
- null
links:
- rel: license
href: 'https://geodatacube.example/api/v1/collections/MOD09Q1/license'
links:
- rel: alternate
href: 'https://geodatacube.example/csw'
title: OGC Catalogue Services 3.0
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
'/collections/{collection_id}':
get:
summary: Full metadata for a specific dataset
operationId: describe-collection
description: |-
Lists **all** information about a specific collection specified by the
identifier `collection_id`.
Note: Providing the Bearer token is REQUIRED for private collections.
**NOTE:** This endpoint may return collections from STAC API / openEO API and OGC API - Coverages.
Distinguish them via the `stac_version` property which is always present for STAC API / openEO API, but not for OGC API - Coverages.
tags:
- Data Discovery / Access
security:
- {}
- Bearer: []
parameters:
- $ref: '#/components/parameters/collection_id'
responses:
'200':
description: JSON object with the full collection metadata.
content:
application/json:
schema:
type: object
allOf:
- $ref: '#/components/schemas/collection'
anyOf:
- title: Coverage Collection
- required:
- 'cube:dimensions'
- summaries
allOf:
- $ref: '#/components/schemas/stac_collection'
example:
stac_version: 1.0.0
stac_extensions:
- https://stac-extensions.github.io/datacube/v2.2.0/schema.json
type: Collection
id: Sentinel-2
title: Sentinel-2 MSI L2A
description: >-
Sentinel-2A is a wide-swath, high-resolution, multi-spectral
imaging mission supporting Copernicus Land Monitoring
studies.
license: proprietary
keywords:
- copernicus
- esa
- msi
- sentinel
providers:
- name: European Space Agency (ESA)
roles:
- producer
- licensor
url: >-
https://sentinel.esa.int/web/sentinel/user-guides/sentinel-2-msi
- name: Google
roles:
- host
url: >-
https://developers.google.com/earth-engine/datasets/catalog/COPERNICUS_S2
extent:
spatial:
bbox:
- - -180
- -56
- 180
- 83
temporal:
interval:
- - '2015-06-23T00:00:00Z'
- null
links:
- rel: license
href: https://scihub.copernicus.eu/twiki/pub/SciHubWebPortal/TermsConditions/Sentinel_Data_Terms_and_Conditions.pdf
type: application/pdf
- rel: http://www.opengis.net/def/rel/ogc/1.0/queryables
href: https://geodatacube.example/api/v1/collections/Sentinel-2A/queryables
type: application/schema+json
- rel: about
href: https://earth.esa.int/web/sentinel/user-guides/sentinel-2-msi/product-types/level-1c
type: text/html
title: ESA Sentinel-2 MSI Level-1C User Guide
- rel: example
href: 'https://geodatacube.example/api/v1/collections/Sentinel-2/examples/true-color.json'
type: application/json
title: Example Process for True-Color Visualization
- rel: example
href: 'https://geodatacube.example/api/v1/collections/Sentinel-2/examples/ndvi.json'
type: application/json
title: Example Process for NDVI Calculation and Visualization
'cube:dimensions':
x:
type: spatial
axis: x
extent:
- -180
- 180
reference_system: 4326
y:
type: spatial
axis: 'y'
extent:
- -56
- 83
reference_system: 4326
t:
type: temporal
extent:
- '2015-06-23T00:00:00Z'
- null
step: null
bands:
type: bands
values:
- B1
- B2
- B3
- B4
- B5
- B6
- B7
- B8
- B8A
- B9
- B10
- B11
- B12
summaries:
'constellation':
- Sentinel-2
'platform':
- Sentinel-2A
- Sentinel-2B
'instruments':
- MSI
'eo:cloud_cover':
minimum: 0
maximum: 75
'sat:orbit_state':
- ascending
- descending
'gsd':
- 10
- 20
- 60
'eo:bands':
- name: B1
common_name: coastal
center_wavelength: 0.4439
gsd: 60
- name: B2
common_name: blue
center_wavelength: 0.4966
gsd: 10
- name: B3
common_name: green
center_wavelength: 0.56
gsd: 10
- name: B4
common_name: red
center_wavelength: 0.6645
gsd: 10
- name: B5
center_wavelength: 0.7039
gsd: 20
- name: B6
center_wavelength: 0.7402
gsd: 20
- name: B7
center_wavelength: 0.7825
gsd: 20
- name: B8
common_name: nir
center_wavelength: 0.8351
gsd: 10
- name: B8A
common_name: nir08
center_wavelength: 0.8648
gsd: 20
- name: B9
common_name: nir09
center_wavelength: 0.945
gsd: 60
- name: B10
common_name: cirrus
center_wavelength: 1.3735
gsd: 60
- name: B11
common_name: swir16
center_wavelength: 1.6137
gsd: 20
- name: B12
common_name: swir22
center_wavelength: 2.2024
gsd: 20
'proj:epsg':
minimum: 32601
maximum: 32660
assets:
thumbnail:
href: 'https://geodatacube.example/api/v1/collections/Sentinel-2/thumbnail.png'
type: image/png
title: Preview
roles:
- thumbnail
inspire:
href: 'https://geodatacube.example/api/v1/collections/Sentinel-2/inspire.xml'
type: application/xml
title: INSPIRE metadata
description: INSPIRE compliant XML metadata
roles:
- metadata
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
'/collections/{collection_id}/queryables':
get:
summary: Metadata filters for a specific dataset
operationId: list-collection-queryables
description: |-
Lists **all** supported metadata filters (also called "queryables") for
a specific collection.
This endpoint is compatible with endpoint defined in the STAC API extension
[`filter`](https://github.com/stac-api-extensions/filter#queryables) and
[OGC API - Features - Part 3: Filtering](https://github.com/opengeospatial/ogcapi-features/tree/master/extensions/filtering).
For a precise definition please follow those specifications.
This endpoints provides a JSON Schema for each queryable that geodatacube
users can use in multiple scenarios:
1. for loading data from the collection, e.g., in the process `load_collection`; and
2. for filtering items using CQL2 on the `/collections/{collection_id}/items` endpoint.
Note: Providing the Bearer token is REQUIRED for private collections.
tags:
- Data Discovery / Access
- OGC API - Features / STAC API
security:
- {}
- Bearer: []
parameters:
- $ref: '#/components/parameters/collection_id'
responses:
'200':
description: |-
A JSON Schema defining the queryables.
It is RECOMMENDED to dereference all "$refs".
content:
application/schema+json:
schema:
$ref: '#/components/schemas/json_schema'
example:
$schema: https://json-schema.org/draft/2019-09/schema
$id: https://geodatacube.example/api/v1/collections/Sentinel-2A/queryables
type: object
title: Sentinel 2A
properties:
'eo:cloud_cover':
title: Cloud Cover
type: number
minimum: 0
maximum: 100
platform:
title: Platform
description: The satellite platform.
type: string
enum:
- sentinel-2a
- sentinel-2b
additionalProperties: false
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
"/collections/{collection_id}/items":
get:
tags:
- OGC API - Features / STAC API
summary: Fetch Features / Items
description: |-
Fetch features of the feature collection with id `collection_id`.
Every feature in a dataset belongs to a collection. A dataset may
consist of multiple feature collections. A feature collection is often a
collection of features of a similar type, based on a common schema.
operationId: list-items
parameters:
- $ref: '#/components/parameters/collection_id'
- $ref: "#/components/parameters/pagination_limit"
- $ref: "#/components/parameters/bbox"
- $ref: "#/components/parameters/datetime"
security:
- {}
- Bearer: []
responses:
"200":
description: |-
The response is a document consisting of features in the collection.
The features included in the response are determined by the server
based on the query parameters of the request. To support access to
larger collections without overloading the client, the API supports
paged access with links to the next page, if more features are selected.
The `bbox` and `datetime` parameter can be used to select only a
subset of the features in the collection (the features that are in the
bounding box or time interval). The `bbox` parameter matches all features
in the collection that are not associated with a location, too. The
`datetime` parameter matches all features in the collection that are
not associated with a time stamp or interval, as well.
The `limit` parameter may be used to control the subset of the
selected features that should be returned in the response, the page size.
Each page may include information about the number of selected and
returned features (`numberMatched` and `numberReturned`) as well as
links to support paging (link relation `next`).
content:
application/geo+json:
schema:
allOf:
- $ref: '#/components/schemas/GeoJsonFeatureCollection'
- type: object
required:
- features
properties:
features:
type: array
items:
$ref: '#/components/schemas/stac_item'
links:
$ref: "#/components/schemas/links"
timeStamp:
$ref: "#/components/schemas/timeStamp"
numberMatched:
$ref: "#/components/schemas/numberMatched"
numberReturned:
$ref: "#/components/schemas/numberReturned"
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
"/collections/{collection_id}/items/{feature_id}":
get:
tags:
- OGC API - Features / STAC API
summary: Fetch a Feature / Item
description: |-
Fetch the feature with id `feature_id` in the feature collection
with id `collection_id`.
operationId: describe-item
security:
- {}
- Bearer: []
parameters:
- $ref: '#/components/parameters/collection_id'
- $ref: "#/components/parameters/feature_id"
responses:
"200":
description: |-
fetch the feature with id `feature_id` in the feature collection
with id `collection_id`
content:
application/geo+json:
schema:
allOf:
- $ref: '#/components/schemas/GeoJsonFeature'
- $ref: '#/components/schemas/stac_item'
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
"/collections/{collection_id}/coverage":
get:
tags:
- Data Discovery / Access
- OGC API - Coverages
summary: Retrieve a coverage
description: |-
Coverage identified by {collection_id}.
Use content negotiation to request required format.
operationId: describe-coverage
security:
- {}
- Bearer: []
parameters:
- "$ref": "#/components/parameters/collection_id"
- "$ref": "#/components/parameters/subset"
- "$ref": "#/components/parameters/bbox"
- "$ref": "#/components/parameters/datetime"
- "$ref": "#/components/parameters/properties"
- "$ref": "#/components/parameters/scale-factor"
- "$ref": "#/components/parameters/scale-axes"
- "$ref": "#/components/parameters/scale-size"
- "$ref": "#/components/parameters/subset-crs"
- "$ref": "#/components/parameters/bbox-crs"
- "$ref": "#/components/parameters/crs"
- "$ref": "#/components/parameters/f-coverage"
responses:
'200':
description: A full coverage.
content:
application/json:
schema:
"$ref": "#/components/schemas/coverageSchema"
image/tiff; application=geotiff:
schema:
type: string
format: binary
multipart/related:
schema:
type: string
format: binaryg
text/html:
schema:
type: string
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
"/collections/{collection_id}/coverage/domainset":
get:
tags:
- Data Discovery / Access
- OGC API - Coverages
summary: Retrieve a coverage's domainset
description: a coverage's domainset; use content negotiation to request
HTML or JSON
operationId: describe-coverage-domainset
security:
- {}
- Bearer: []
parameters:
- "$ref": "#/components/parameters/collection_id"
- "$ref": "#/components/parameters/subset"
- "$ref": "#/components/parameters/bbox"
- "$ref": "#/components/parameters/datetime"
- "$ref": "#/components/parameters/crs"
- "$ref": "#/components/parameters/bbox-crs"
- "$ref": "#/components/parameters/subset-crs"
- "$ref": "#/components/parameters/f-domainset"
responses:
'200':
description: A coverages domainset.
content:
application/json:
schema:
"$ref": "#/components/schemas/domainSet"
text/html:
schema:
type: string
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
"/collections/{collection_id}/coverage/rangetype":
get:
tags:
- Data Discovery / Access
- OGC API - Coverages
summary: Retrieve a coverage's rangetype
description: a coverage's rangetype; use content negotiation to request
HTML or JSON
operationId: describe-coverage-rangetype
security:
- {}
- Bearer: []
parameters:
- "$ref": "#/components/parameters/collection_id"
- "$ref": "#/components/parameters/f-rangetype"
responses:
'200':
description: A coverage's rangetype.
content:
application/json:
schema:
"$ref": "#/components/schemas/rangeType"
text/html:
schema:
type: string
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
/processes:
get:
summary: Supported predefined processes
operationId: list-processes
description: |-
Lists all predefined processes and returns
detailed process descriptions, including parameters and return values.
**NOTE:** This endpoint may return processes from openEO and OGC API - Processes.
Distinguish them via the `version` property (OGC API) and the `parameters` / `returns` (openEO) properties.
tags:
- Process Discovery
- OGC API - Processes
- openEO
security:
- {}
- Bearer: []
parameters:
- $ref: '#/components/parameters/pagination_limit'
responses:
'200':
description: Formal specification describing the supported predefined processes.
content:
application/json:
schema:
title: Processes
type: object
required:
- processes
- links
properties:
processes:
type: array
items:
oneOf:
- title: openEO Predefined Process
description: A predefined process made available by the back-end.
type: object
required:
- id
- description
- parameters
- returns
allOf:
- $ref: '#/components/schemas/process'
- title: OGC API Process
allOf:
- $ref: '#/components/schemas/ogc_processSummary'
links:
$ref: '#/components/schemas/links_pagination'
example:
processes:
- id: apply
summary: Apply a process to each pixel
description: >-
Applies a *unary* process to each pixel value in the data cube (i.e., a local operation). A unary process takes a single value and returns a single value, for example ``abs()`` or ``linear_scale_range()``.
categories:
- cubes
parameters:
- name: data
description: A data cube.
schema:
type: object
subtype: datacube
- name: process
description: 'A unary process to be applied on each value, may consist of multiple sub-processes.'
schema:
type: object
subtype: process-graph
parameters:
- name: x
description: The value to process.
schema:
description: Any data type.
returns:
description: 'A data cube with the newly computed values. The resolution, cardinality, and the number of dimensions are the same as for the original data cube.'
schema:
type: object
subtype: datacube
- id: multiply
summary: Multiplication of two numbers
description: |-
Multiplies the two numbers `x` and `y` (*x * y*) and returns the computed product.
No-data values are taken into account so that `null` is returned if any element is such a value.
The computations follow [IEEE Standard 754](https://ieeexplore.ieee.org/document/8766229) whenever the processing environment supports it.
categories:
- math
parameters:
- name: x
description: The multiplier.
schema:
type:
- number
- 'null'
- name: 'y'
description: The multiplicand.
schema:
type:
- number
- 'null'
returns:
description: The computed product of the two numbers.
schema:
type:
- number
- 'null'
exceptions:
MultiplicandMissing:
message: Multiplication requires at least two numbers.
examples:
- arguments:
x: 5
y: 2.5
returns: 12.5
- arguments:
x: -2
y: -4
returns: 8
- arguments:
x: 1
y: null
returns: null
links:
- rel: about
href: 'http://mathworld.wolfram.com/Product.html'
title: Product explained by Wolfram MathWorld
- rel: about
href: 'https://ieeexplore.ieee.org/document/8766229'
title: IEEE Standard 754-2019 for Floating-Point Arithmetic
links:
- rel: alternate
href: 'https://geodatacube.example/processes'
type: text/html
title: HTML version of the processes
/processes/{processID}:
get:
tags:
- Process Discovery
- OGC API - Processes
summary: Retrieve an OGC API process description
description: |
The process description contains information about inputs and outputs and a link to the execution-endpoint for the process. The Core does not mandate the use of a specific process description to specify the interface of a process. That said, the Core requirements class makes the following recommendation.
Implementations SHOULD consider supporting the OGC process description.
For more information, see [Section 7.10](https://docs.ogc.org/is/18-062/18-062.html#sc_process_description).
operationId: describe-ogc-process
security:
- {}
- Bearer: []
parameters:
- $ref: '#/components/parameters/ogc_processID'
responses:
"200":
description: A process description.
content:
application/json:
schema:
$ref: '#/components/schemas/ogc_process'
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
/processes/{processID}/execution:
post:
tags:
- OGC API - Processes
summary: OGC API / Execute a process
description: |
Create a new job.
For more information, see [Section 7.11](https://docs.ogc.org/is/18-062/18-062.html#sc_create_job).
operationId: execute-ogc-process
security:
- Bearer: []
parameters:
- $ref: '#/components/parameters/ogc_processID'
requestBody:
description: Mandatory execute request JSON
content:
application/json:
schema:
$ref: '#/components/schemas/ogc_execute'
required: true
responses:
"200":
description: Result of synchronous execution
content:
/*:
schema:
description: Any kind of data could be returned.
"201":
description: Started asynchronous execution. Created job.
headers:
Location:
description: URL to check the status of the execution/job.
style: simple
explode: false
schema:
type: string
Preference-Applied:
description: The preference applied to execute the process asynchronously (see. RFC 2740).
style: simple
explode: false
schema:
type: string
content:
application/json:
schema:
$ref: '#/components/schemas/ogc_statusInfo'
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
callbacks:
jobCompleted:
'{$request.body#/subscriber/successUri}':
post:
requestBody:
content:
application/json:
schema:
$ref: '#/components/schemas/ogc_results'
responses:
"200":
description: Results received successfully
/credentials/basic:
get:
summary: HTTP Basic authentication
operationId: authenticate-basic
description: >-
Checks the credentials provided through [HTTP Basic Authentication
according to RFC 7617](https://www.rfc-editor.org/rfc/rfc7617.html) and returns
an access token for valid credentials.
The credentials (username and password) MUST be sent in the HTTP header
`Authorization` with type `Basic` and the Base64 encoded string
consisting of username and password separated by a double colon `:`. The
header would look as follows for username `user` and password `pw`:
`Authorization: Basic dXNlcjpwdw==`.
The access token has to be used in the Bearer token for authorization in
subsequent API calls (see also the information about Bearer tokens in
this document). The access token returned by this request MUST NOT be
provided with `basic//` prefix, but the Bearer Token sent in subsequent
API calls to protected endpoints MUST be prefixed with `basic//`. The
header in subsequent API calls would look as follows: `Authorization:
Bearer basic//TOKEN` (replace `TOKEN` with the actual access token).
It is RECOMMENDED to implement this authentication method for non-public
services only.
tags:
- Account Management
security:
- Basic: []
responses:
'200':
description: Credentials are correct and authentication succeeded.
content:
application/json:
schema:
title: HTTP Basic Access Token
type: object
required:
- access_token
properties:
access_token:
description: >-
The access token (without `basic//` prefix) to be used in
the Bearer token for authorization in subsequent API
calls.
type: string
example: b34ba2bdf9ac9ee1
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
/credentials/oidc:
get:
summary: OpenID Connect authentication
operationId: authenticate-oidc
description: |-
Lists the supported [OpenID Connect](http://openid.net/connect/)
providers (OP). OpenID Connect Providers MUST support [OpenID Connect
Discovery](http://openid.net/specs/openid-connect-discovery-1_0.html).
It is highly RECOMMENDED to implement OpenID Connect for public services
in favor of Basic authentication.
GDC clients MUST use the **access token** as part of the Bearer token
for authorization in subsequent API calls (see also the information
about Bearer tokens in this document). Clients MUST NOT use the id token
or the authorization code. The access token provided by an OpenID Connect
Provider does not necessarily provide information about the issuer (i.e., the
OpenID Connect provider) and therefore a prefix MUST be added to the Bearer
Token sent in subsequent API calls to protected endpoints. The Bearer
Token sent to protected endpoints MUST consist of the authentication
method (here `oidc`), the provider ID, and the access token itself. All
separated by a forward slash `/`. The provider ID corresponds to the
value specified for `id` for each provider in the response body of this
endpoint. The header in subsequent API calls for a provider with `id`
`ms` would look as follows: `Authorization: Bearer oidc/ms/TOKEN`
(replace `TOKEN` with the actual access token received from the OpenID
Connect Provider).
Back-ends MAY request user information ([including Claims](https://openid.net/specs/openid-connect-core-1_0.html#Claims))
from the [OpenID Connect Userinfo endpoint](https://openid.net/specs/openid-connect-core-1_0.html#UserInfo)
using the access token (without the prefix described above). Therefore,
both openEO client and openEO back-end are relying parties (clients) to
the OpenID Connect Provider.
tags:
- Account Management
security:
- {}
responses:
'200':
description: Lists the the OpenID Connect Providers.
content:
application/json:
schema:
title: OpenID Connect Providers
type: object
required:
- providers
properties:
providers:
type: array
description: >-
The first provider in this list is the default provider for authentication.
Clients can either pre-select or directly use the default provider for authentication
if the user doesn't specify a specific value.
minItems: 1
items:
title: OpenID Connect Provider
type: object
required:
- id
- issuer
- title
properties:
id:
type: string
description: >-
A per-backend **unique** identifier for the OpenID Connect Provider to
be as prefix for the Bearer token.
pattern: '[\d\w]{1,20}'
issuer:
type: string
format: uri
description: >-
The [issuer location](https://openid.net/specs/openid-connect-discovery-1_0.html#ProviderConfig)
(also referred to as 'authority' in some client libraries) is the URL of the
OpenID Connect provider, which conforms to a set of rules:
1. After appending `/.well-known/openid-configuration` to the URL, a
[HTTP/1.1 GET
request](https://openid.net/specs/openid-connect-discovery-1_0.html#ProviderConfigurationRequest)
to the concatenated URL MUST return a [OpenID Connect Discovery Configuration
Response](https://openid.net/specs/openid-connect-discovery-1_0.html#ProviderConfigurationResponse).
The response provides all information required to authenticate using
OpenID Connect.
2. The URL MUST NOT contain a terminating forward slash `/`.
example: 'https://accounts.google.com'
scopes:
type: array
description: >-
A list of OpenID Connect scopes that the client MUST at least include when requesting authorization.
Clients MAY add additional scopes such as the `offline_access` scope to retrieve a refresh token.
If scopes are specified, the list MUST at least contain the `openid` scope.
items:
type: string
title:
type: string
description: >-
The name that is publicly shown in clients for this
OpenID Connect provider.
description:
type: string
format: commonmark
description: |-
A description that explains how the authentication procedure works.
It should make clear how to register and get credentials. This should
include instruction on setting up `client_id`, `client_secret` and `redirect_uri`.
[CommonMark 0.29](http://commonmark.org/) syntax MAY be used for rich
text representation.
default_clients:
title: Default OpenID Connect Clients
type: array
description: |-
List of default OpenID Connect clients that can be used by an openEO client
for OpenID Connect based authentication.
A default OpenID Connect client is managed by the back-end implementer.
It MUST be configured to be usable without a client secret,
which limits its applicability to OpenID Connect grant types like
"Authorization Code Grant with PKCE" and "Device Authorization Grant with PKCE"
A default OpenID Connect client is provided without availability guarantees.
The back-end implementer CAN revoke, reset, or update it any time.
As such, openEO clients SHOULD NOT store or cache default OpenID Connect client information
for long term usage.
A default OpenID Connect client is intended to simplify authentication for novice users.
For production use cases, it is RECOMMENDED to set up a dedicated OpenID Connect client.
uniqueItems: true
items:
title: Default OpenID Connect Client
type: object
required:
- id
- grant_types
properties:
id:
type: string
description: >-
The OpenID Connect Client ID to be used in the authentication procedure.
grant_types:
type: array
description: |-
List of authorization grant types (flows) supported by the OpenID Connect client.
A grant type descriptor consist of a OAuth 2.0 grant type,
with an additional `+pkce` suffix when the grant type should be used with
the PKCE extension as defined in [RFC 7636](https://www.rfc-editor.org/rfc/rfc7636.html).
Allowed values:
- `implicit`: Implicit Grant as specified in [RFC 6749, sec. 1.3.2](https://www.rfc-editor.org/rfc/rfc6749.html#section-1.3.2)
- `authorization_code` / `authorization_code+pkce`: Authorization Code Grant as specified in [RFC 6749, sec. 1.3.1](https://www.rfc-editor.org/rfc/rfc6749.html#section-1.3.1), with or without PKCE extension.
- `urn:ietf:params:oauth:grant-type:device_code` / `urn:ietf:params:oauth:grant-type:device_code+pkce`: Device Authorization Grant (aka Device Code Flow) as specified in [RFC 8628](https://www.rfc-editor.org/rfc/rfc8628.html), with or without PKCE extension. Note that the combination of this grant with the PKCE extension is *not standardized* yet.
- `refresh_token`: Refresh Token as specified in [RFC 6749, sec. 1.5](https://www.rfc-editor.org/rfc/rfc6749.html#section-1.5)
minItems: 1
uniqueItems: true
items:
type: string
enum:
- 'implicit'
- 'authorization_code'
- 'authorization_code+pkce'
- 'urn:ietf:params:oauth:grant-type:device_code'
- 'urn:ietf:params:oauth:grant-type:device_code+pkce'
- 'refresh_token'
redirect_urls:
type: array
description: |-
List of redirect URLs that are whitelisted by the OpenID Connect client.
Redirect URLs MUST be provided when the OpenID Connect client supports
the Implicit Grant or the Authorization Code Grant (with or without PKCE extension).
uniqueItems: true
items:
type: string
format: uri
links:
type: array
description: |-
Links related to this provider, for example a
help page or a page to register a new user account.
For relation types see the lists of
[common relation types in openEO](#section/API-Principles/Web-Linking).
items:
$ref: '#/components/schemas/link'
example:
providers:
- id: egi
issuer: 'https://aai.egi.eu/oidc'
title: EGI (default)
description: Login with your academic account.
scopes:
- openid
- profile
default_clients:
- id: KStcUzD5AIUA
grant_types:
- implicit
- authorization_code+pkce
- urn:ietf:params:oauth:grant-type:device_code+pkce
- refresh_token
redirect_urls:
- https://editor.openeo.org/
- id: google
issuer: 'https://accounts.google.com'
title: Google
description: Login with your Google Account.
scopes:
- openid
- profile
- earthengine
- id: ms
issuer: 'https://login.microsoftonline.com/example-tenant/v2.0'
title: Microsoft
description: Login with your Microsoft or Skype Account.
scopes: []
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
/result:
post:
summary: Process and download data synchronously
operationId: compute-result
description: >-
Executes a user-defined process directly (synchronously) and the result will be
downloaded in the format specified in the process graph. This endpoint
can be used to generate small previews or test user-defined processes before
starting a batch job.
Timeouts on either client- or server-side are to be expected for complex computations.
Back-ends MAY send the an error immediately if the computation is expected to time out.
Otherwise requests MAY time-out after a certain amount of time by sending an error.
tags:
- openEO
security:
- Bearer: []
responses:
'200':
description: Result data in the requested output format
headers:
Content-Type:
description: |-
The appropriate media (MIME) type for the requested output
format MUST be sent, if the response contains a single file.
To send multiple files at once it is RECOMMENDED to use the
[`tar` file format](https://www.gnu.org/software/tar/manual/html_node/Standard.html)
(media type: `application/x-tar`).
To mimic the results of batch jobs, it is RECOMMENDED that
1. clients extract the tar file directly after receiving it so that users
can directly work on the contained files *and*
2. back-ends add STAC Items and/or Collections to the tar file
so that users can make sense of the files.
schema:
type: string
Link:
description: >-
The header MAY indicate a link to a log file generated by the request. If provided, the link MUST be serialized according to [RFC 8288](https://www.rfc-editor.org/rfc/rfc8288.html#section-3) and MUST use the relation type `monitor`. The link MUST follow the specifications for the links `GET /jobs/{job_id}/logs` and `GET /services/{service_id}/logs`, except that is MUST NOT accept any parameters (limit/offset). Therefore, the link MUST be accessible with HTTP GET, MUST be secured using a Bearer token and MUST follow the corresponding request body schema.
schema:
type: string
pattern: ^<[^>]+>;\s?rel="monitor"
example: <https://geodatacube.example/api/v1/logs/258489231>; rel="monitor"
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
requestBody:
description: 'Specifies the job details, e.g., the user-defined process and billing details.'
required: true
content:
application/json:
schema:
title: Synchronous Result Request
type: object
required:
- process
properties:
process:
$ref: '#/components/schemas/process_graph_with_metadata'
log_level:
$ref: '#/components/schemas/min_log_level_default'
additionalProperties:
description: You can add additional back-end specific properties here.
/process_graphs:
get:
summary: List all user-defined openEO processes
operationId: list-custom-processes
description: |-
Lists all user-defined processes (process graphs) of the
authenticated user that are stored at the back-end.
It is **strongly RECOMMENDED** to keep the response size small by
omitting larger optional values from the objects in `processes`
(e.g., the `exceptions`, `examples` and `links` properties).
To get the full metadata for a user-defined process clients MUST
request `GET /process_graphs/{process_graph_id}`.
tags:
- Process Discovery
- openEO - User-Defined Processes
security:
- Bearer: []
parameters:
- $ref: '#/components/parameters/pagination_limit'
responses:
'200':
description: JSON array with user-defined processes.
content:
application/json:
schema:
title: User-Defined Processes
type: object
required:
- processes
- links
properties:
processes:
description: Array of user-defined processes
type: array
items:
$ref: '#/components/schemas/user_defined_process_meta'
links:
$ref: '#/components/schemas/links_pagination'
example:
processes:
- id: evi
summary: Enhanced Vegetation Index
description: >-
Computes the Enhanced Vegetation Index (EVI).
It is computed with the following formula: `2.5 * (NIR - RED) / (1 + NIR + 6*RED + -7.5*BLUE)`.
parameters:
- name: red
description: Value from the red band.
schema:
type: number
- name: blue
description: Value from the blue band.
schema:
type: number
- name: nir
description: Value from the near infrared band.
schema:
type: number
returns:
description: Computed EVI.
schema:
type: number
- id: ndsi
summary: Normalized-Difference Snow Index
parameters:
- name: green
description: Value from the Visible Green (0.53 - 0.61 micrometers) band.
schema:
type: number
- name: swir
description: Value from the Short Wave Infrared (1.55 - 1.75 micrometers) band.
schema:
type: number
returns:
schema:
type: number
- id: my_custom_process
links: []
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
'/process_graphs/{process_graph_id}':
parameters:
- name: process_graph_id
in: path
description: Per-user unique identifier for a user-defined process.
required: true
schema:
$ref: '#/components/schemas/process_id'
get:
summary: Full metadata for a user-defined process
operationId: describe-custom-process
description: Lists all information about a user-defined process, including its process graph.
tags:
- openEO - User-Defined Processes
security:
- Bearer: []
responses:
'200':
description: The user-defined process with process graph.
content:
application/json:
schema:
title: User-Defined Process
description: A user-defined process with processing instructions as process graph.
type: object
required:
- process_graph
allOf:
- $ref: '#/components/schemas/user_defined_process_meta'
examples:
evi_user_defined_process:
$ref: '#/components/examples/evi_user_defined_process'
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
put:
summary: Store a user-defined process
operationId: store-custom-process
description: |-
Stores a provided user-defined process with process graph that can be
reused in other processes.
If a process with the specified `process_graph_id` exists, the process
is fully replaced. The id can't be changed for existing user-defined
processes. The id MUST be unique across its namespace.
Partially updating user-defined processes is not supported.
To simplify exchanging user-defined processes, the property `id` can be part of
the request body. If the values don't match, the value for `id` gets
replaced with the value from the `process_graph_id` parameter in the
path.
tags:
- openEO - User-Defined Processes
security:
- Bearer: []
responses:
'200':
description: The user-defined process has been stored successfully.
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
requestBody:
required: true
description: Specifies the process graph with its meta data.
content:
application/json:
schema:
$ref: '#/components/schemas/process_graph_with_metadata'
examples:
evi_user_defined_process:
$ref: '#/components/examples/evi_user_defined_process'
delete:
summary: Delete a user-defined process
operationId: delete-custom-process
description: |-
Deletes the data related to this user-defined process, including its process graph.
Does NOT delete jobs or services that reference this user-defined process.
tags:
- openEO - User-Defined Processes
security:
- Bearer: []
responses:
'204':
description: The user-defined process has been successfully deleted
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
/service_types:
get:
summary: Supported secondary web service protocols
operationId: list-service-types
description: |-
Lists supported secondary web service protocols such as
[OGC WMS](http://www.opengeospatial.org/standards/wms),
[OGC WCS](http://www.opengeospatial.org/standards/wcs),
[OGC API - Features](https://www.ogc.org/standards/ogcapi-features)
or [XYZ tiles](https://wiki.openstreetmap.org/wiki/Slippy_map_tilenames).
The response is an object of all available secondary web service protocols
with their supported configuration settings and expected process parameters.
* The configuration settings for the service SHOULD be defined upon
creation of a service and the service will be set up accordingly.
* The process parameters SHOULD be referenced (with a `from_parameter`
reference) in the user-defined process that is used to compute web service
results.
The appropriate arguments MUST be provided to the user-defined process,
usually at runtime from the context of the web service,
For example, a map service such as a WMS would
need to inject the spatial extent into the user-defined process so that the
back-end can compute the corresponding tile correctly.
To improve interoperability between back-ends common names for the
services SHOULD be used, e.g., the abbreviations used in the official
[OGC Schema Repository](http://schemas.opengis.net/) for the respective
services.
Service names MUST be accepted in a *case insensitive* manner throughout the API.
tags:
- openEO - Secondary Services (OGC APIs)
security:
- {}
- Bearer: []
responses:
'200':
description: >-
An object with a map containing all service names as keys and an
object that defines supported configuration settings and process parameters.
content:
application/json:
schema:
title: Service Types
type: object
description: Map of supported secondary web services.
additionalProperties:
x-additionalPropertiesName: Service Name
title: Service Type
type: object
required:
- configuration
- process_parameters
properties:
title:
$ref: '#/components/schemas/object_title'
description:
$ref: '#/components/schemas/description'
deprecated:
$ref: '#/components/schemas/deprecated'
experimental:
$ref: '#/components/schemas/experimental'
configuration:
title: Service Configuration
description: Map of supported configuration settings made available to the creator of the service.
type: object
additionalProperties:
$ref: '#/components/schemas/resource_parameter'
process_parameters:
title: Process Parameters
description: List of parameters made available to user-defined processes.
type: array
items:
$ref: '#/components/schemas/process_parameter'
links:
description: |-
Links related to this service type, e.g., more
information about the configuration settings and process parameters.
For relation types see the lists of
[common relation types](#section/API-Principles/Web-Linking).
type: array
items:
$ref: '#/components/schemas/link'
example:
WMS:
title: OGC Web Map Service
configuration:
version:
type: string
description: The WMS version offered to consumers of the service.
default: 1.3.0
enum:
- 1.1.1
- 1.3.0
process_parameters:
- name: layer
description: The layer name.
schema:
type: string
default: roads
- name: spatial_extent
description: A bounding box in WGS84.
schema:
type: object
required:
- west
- south
- east
- north
properties:
west:
description: West (lower left corner, coordinate axis 1).
type: number
south:
description: South (lower left corner, coordinate axis 2).
type: number
east:
description: East (upper right corner, coordinate axis 1).
type: number
north:
description: North (upper right corner, coordinate axis 2).
type: number
links:
- href: 'https://www.opengeospatial.org/standards/wms'
rel: about
title: OGC Web Map Service Standard
OGCAPI-FEATURES:
title: OGC API - Features
description: Exposes a OGC API - Features in version 1.0 of the specification (successor of OGC WFS 3.0).
configuration:
title:
type: string
description: The title for the OGC API - Features landing page
description:
type: string
description: The description for the OGC API - Features landing page
conformsTo:
type: array
description: |-
The OGC API - Features conformance classes to enable for this service.
`http://www.opengis.net/spec/ogcapi-features-1/1.0/conf/core` is always enabled.
items:
type: string
enum:
- http://www.opengis.net/spec/ogcapi-features-1/1.0/conf/oas30
- http://www.opengis.net/spec/ogcapi-features-1/1.0/conf/html
- http://www.opengis.net/spec/ogcapi-features-1/1.0/conf/geojson
- http://www.opengis.net/spec/ogcapi-features-2/1.0/conf/crs
process_parameters: []
links:
- href: 'https://www.opengeospatial.org/standards/wfs'
rel: about
title: OGC Web Feature Service Standard
4XX:
$ref: '#/components/responses/client_error'
5XX:
$ref: '#/components/responses/server_error'
/services:
get:
summary: List all web services
operationId: list-services
description: |-
Lists all secondary web services submitted by a user.
It is **strongly RECOMMENDED** to keep the response size small by omitting
all optional non-scalar values (i.e., arrays and objects) from objects in `services`
(i.e., the `process`, `configuration` and `attributes` properties).
To get the full metadata for a secondary web service clients MUST
request `GET /services/{service_id}`.
tags:
- openEO - Secondary Services (OGC APIs)
security:
- Bearer: []
parameters:
- $ref: '#/components/parameters/pagination_limit'
responses:
'200':
description: Array of secondary web service descriptions
content:
application/json:
schema:
title: Secondary Web Services
type: object
required:
- services
- links
properties:
services:
type: array
items:
$ref: '#/components/schemas/service'
links:
$ref: '#/components/schemas/links_pagination'
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
post:
summary: Publish a new service
operationId: create-service
description: |-
Creates a new secondary web service such as a
[OGC WMS](http://www.opengeospatial.org/standards/wms),
[OGC WCS](http://www.opengeospatial.org/standards/wcs),
[OGC API - Features](https://www.ogc.org/standards/ogcapi-features)
or [XYZ tiles](https://wiki.openstreetmap.org/wiki/Slippy_map_tilenames).
The secondary web service SHOULD process the underlying
data on demand, based on process parameters provided to the
user-defined process (through `from_parameter` references) at run-time,
for example for the spatial/temporal extent, resolution, etc.
The available process parameters are specified per
service type at `GET /service_types`.
**Note:** Costs incurred by shared secondary web services are usually
paid by the owner, but this depends on the service type and whether it
supports charging fees or not.
tags:
- openEO - Secondary Services (OGC APIs)
security:
- Bearer: []
responses:
'201':
description: The service has been created successfully.
headers:
Location:
required: true
schema:
description: |-
Absolute URL to the newly created service.
The URL points to the metadata endpoint
`GET /services/{service_id}` with the `{service_id}` being the
unique identifier (ID) of the created service.
MUST NOT point to the actual instance (e.g., WMTS base URL) of
the service. The URL to the instance is made available by the
metadata endpoint in the property `url`.
format: uri
type: string
example: 'https://geodatacube.example/api/v1/services/123'
GDC-Identifier:
required: true
schema:
$ref: '#/components/schemas/service_id'
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
requestBody:
required: true
content:
application/json:
schema:
title: Store Secondary Web Service Request
type: object
required:
- type
- process
properties:
title:
$ref: '#/components/schemas/eo_title'
description:
$ref: '#/components/schemas/eo_description'
process:
$ref: '#/components/schemas/process_graph_with_metadata'
type:
$ref: '#/components/schemas/service_type'
enabled:
allOf:
- $ref: '#/components/schemas/service_enabled'
- default: true
configuration:
$ref: '#/components/schemas/service_configuration'
log_level:
$ref: '#/components/schemas/min_log_level_default'
additionalProperties:
description: You can add additional back-end specific properties here.
description: The base data for the secondary web service to create
'/services/{service_id}':
parameters:
- $ref: '#/components/parameters/service_id'
patch:
summary: Modify a service
operationId: update-service
description: |-
Modifies an existing secondary web service at the back-end,
but maintain the identifier. Changes can be grouped in a single request.
User have to create a new service to change the service type.
tags:
- openEO - Secondary Services (OGC APIs)
security:
- Bearer: []
responses:
'204':
description: Changes to the service were applied successfully.
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
requestBody:
required: true
content:
application/json:
schema:
title: Update Secondary Web Service Request
type: object
properties:
title:
$ref: '#/components/schemas/eo_title'
description:
$ref: '#/components/schemas/eo_description'
process:
$ref: '#/components/schemas/process_graph_with_metadata'
enabled:
$ref: '#/components/schemas/service_enabled'
configuration:
$ref: '#/components/schemas/service_configuration'
log_level:
$ref: '#/components/schemas/min_log_level_update'
description: The data to change for the specified secondary web service.
get:
summary: Full metadata for a service
operationId: describe-service
description: Lists all information about a secondary web service.
tags:
- openEO - Secondary Services (OGC APIs)
security:
- Bearer: []
responses:
'200':
description: Details of the created service
content:
application/json:
schema:
type: object
required:
- process
- configuration
- attributes
allOf:
- $ref: '#/components/schemas/service'
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
delete:
summary: Delete a service
operationId: delete-service
description: >-
Deletes all data related to this secondary web service.
Computations are stopped, computed results are deleted and access to
this is not possible any more. This service won't generate additional
costs.
tags:
- openEO - Secondary Services (OGC APIs)
security:
- Bearer: []
responses:
'204':
description: The service has been successfully deleted.
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
'/services/{service_id}/logs':
get:
summary: Logs for a secondary service
operationId: debug-service
description: >-
Lists log entries for the secondary service, usually for debugging purposes.
Back-ends can log any information that may be relevant for a user.
Users can log information during data processing using respective
processes such as `inspect`.
If requested consecutively while the secondary service is enabled, it is
RECOMMENDED that clients use the offset parameter to get only the entries
they have not received yet.
While pagination itself is OPTIONAL, the `offset` parameter is REQUIRED
to be implemented by back-ends.
tags:
- openEO - Secondary Services (OGC APIs)
security:
- Bearer: []
parameters:
- $ref: '#/components/parameters/service_id'
- $ref: '#/components/parameters/log_offset'
- $ref: '#/components/parameters/log_level'
- $ref: '#/components/parameters/pagination_limit'
responses:
'200':
$ref: '#/components/responses/logs'
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
/jobs:
get:
summary: List all batch jobs
operationId: list-jobs
description: |-
Lists all batch jobs submitted by a user.
It is **strongly RECOMMENDED** to keep the response size small by
omitting all optional non-scalar values (i.e., arrays and objects) from
objects in `jobs`.
To get the full metadata for a job clients MUST request `GET /jobs/{job_id}`.
**NOTE:** This endpoint may return jobs from openEO and OGC API - Processes.
Distinguish them via the `jobID` (OGC API) and the `id` (openEO) property.
tags:
- OGC API - Processes
- openEO
security:
- Bearer: []
parameters:
- $ref: '#/components/parameters/pagination_limit'
responses:
'200':
description: Array of job descriptions
content:
application/json:
schema:
title: Batch Jobs
type: object
required:
- jobs
- links
properties:
jobs:
type: array
items:
oneOf:
- title: openEO Batch Job
allOf:
- $ref: '#/components/schemas/batch_job'
- title: OGC API Job
allOf:
- $ref: '#/components/schemas/ogc_statusInfo'
links:
$ref: '#/components/schemas/links_pagination'
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
post:
summary: Create a new batch job
operationId: create-job
description: |-
Creates a new batch processing task (job) from one or more (chained)
processes at the back-end.
Processing the data doesn't start yet. The job status gets initialized
as `created` by default.
tags:
- openEO
security:
- Bearer: []
responses:
'201':
description: The batch job has been created successfully.
headers:
Location:
required: true
schema:
description: |-
Absolute URL to the newly created batch job.
The URL points to the metadata endpoint
`GET /jobs/{job_id}` with the `{job_id}` being the
unique identifier (ID) of the created batch job.
format: uri
type: string
example: 'https://geodatacube.example/api/v1/jobs/123'
GDC-Identifier:
required: true
schema:
$ref: '#/components/schemas/job_id'
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
requestBody:
required: true
content:
application/json:
schema:
title: Store Batch Job Request
type: object
required:
- process
properties:
title:
$ref: '#/components/schemas/eo_title'
description:
$ref: '#/components/schemas/eo_description'
process:
$ref: '#/components/schemas/process_graph_with_metadata'
log_level:
$ref: '#/components/schemas/min_log_level_default'
additionalProperties:
description: You can add additional back-end specific properties here.
description: 'Specifies the job details, e.g., the user-defined process and billing details.'
'/jobs/{job_id}':
parameters:
- $ref: '#/components/parameters/job_id'
patch:
summary: Modify a batch job
operationId: update-job
description: |-
Modifies an existing job at the back-end, but maintains the identifier.
Changes can be grouped in a single request.
The job status does not change.
Jobs can only be modified when the job is not queued and not running.
Otherwise, requests to this endpoint MUST be rejected with an error.
tags:
- openEO
security:
- Bearer: []
responses:
'204':
description: Changes to the job applied successfully.
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
requestBody:
required: true
content:
application/json:
schema:
title: Update Batch Job Request
type: object
properties:
title:
$ref: '#/components/schemas/eo_title'
description:
$ref: '#/components/schemas/eo_description'
process:
$ref: '#/components/schemas/process_graph_with_metadata'
log_level:
$ref: '#/components/schemas/min_log_level_update'
description: Specifies the job details to update.
get:
summary: Full metadata for a batch job
operationId: describe-job
description: |-
Lists information about a batch job.
**NOTE:** This endpoint may return a job from openEO or OGC API - Processes.
Distinguish them via the `jobID` (OGC API) and the `id` (openEO) property.
tags:
- openEO
- OGC API - Processes
security:
- Bearer: []
responses:
'200':
description: Full job information.
content:
application/json:
schema:
oneOf:
- title: openEO Batch Job
type: object
required:
- process
allOf:
- $ref: '#/components/schemas/batch_job'
- title: OGC API Job
allOf:
- $ref: '#/components/schemas/ogc_statusInfo'
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
delete:
summary: Delete a batch job
operationId: delete-job
description: >-
Deletes all data related to this job. Computations are stopped and
computed results are deleted. This job won't generate additional costs
for processing.
tags:
- openEO
- OGC API - Processes
security:
- Bearer: []
responses:
'200':
description: The job has been successfully deleted (OGC API - Processes).
content:
application/json:
schema:
$ref: '#/components/schemas/ogc_statusInfo'
'204':
description: The job has been successfully deleted (openEO).
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
'/jobs/{job_id}/logs':
get:
summary: Logs for a batch job
operationId: debug-job
description: |-
Lists log entries for the batch job, usually for debugging purposes.
Back-ends can log any information that may be relevant for a user
at any stage (status) of the batch job.
Users can log information during data processing using respective
processes such as `inspect`.
If requested consecutively, it is RECOMMENDED that clients use the offset
parameter to get only the entries they have not received yet.
While pagination itself is OPTIONAL, the `offset` parameter is REQUIRED
to be implemented by back-ends.
tags:
- openEO
security:
- Bearer: []
parameters:
- $ref: '#/components/parameters/job_id'
- $ref: '#/components/parameters/log_offset'
- $ref: '#/components/parameters/log_level'
- $ref: '#/components/parameters/pagination_limit'
responses:
'200':
$ref: '#/components/responses/logs'
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
'/jobs/{job_id}/results':
parameters:
- $ref: '#/components/parameters/job_id'
get:
summary: List batch job results
operationId: list-results
description: |-
**NOTE:** This endpoint may return a job from openEO or OGC API - Processes.
Distinguish them via the `assets` property which is always present for openEO, but not for OGC API - Processes.
## OGC API - Processes
Lists available results of a job. In case of a failure, lists exceptions instead.
For more information, see [Section 7.13](https://docs.ogc.org/is/18-062/18-062.html#sc_retrieve_job_results).
## openEO
Lists signed URLs pointing to the processed files, usually after the batch job
has finished. Back-ends may also point to intermediate results after the
job has stopped due to an error or if the `partial` parameter has been set.
The response includes additional metadata. It is a valid
[STAC Item](https://github.com/radiantearth/stac-spec/tree/v1.0.0/item-spec)
(if it has spatial and temporal references included) or a valid
[STAC Collection](https://github.com/radiantearth/stac-spec/tree/v1.0.0/collection-spec).
The assets to download are in both cases available in the property `assets`
and have the same structure. All additional metadata is not strictly required
to download the files, but are helpful for users to understand the data.
STAC Collections can either (1) add all assets as collection-level assets or
(2) link to STAC Catalogs and STAC Items with signed URLs, which will provide a full
STAC catalog structure a client has to go through. Option 2 is overall the better
architectural choice and allows a fine-grained description of the processed data.
Clients are RECOMMENDED to store this response and all potential sub-catalogs
and items with the assets so that the downloaded data is then a self-contained
STAC catalog user could publish easily with all the data and metadata.
URL signing is a way to protect files from unauthorized access with a
key in the URL instead of HTTP header based authorization. The URL
signing key is similar to a password and its inclusion in the URL allows
to download files using simple GET requests supported by a wide range of
programs, e.g., web browsers or download managers. Back-ends are
responsible to generate the URL signing keys and to manage their
appropriate expiration. The back-end MAY indicate an expiration time by
setting the `expires` property in the response. Requesting this endpoint
SHOULD always return non-expired URLs. Signed URLs that were generated
for a previous request and already expired SHOULD NOT be reused,
but regenerated with new expiration time.
Signed URLs that expired MAY return an error.
It is **strongly recommended** to add a link with relation type `canonical`
to the STAC Item or STAC Collection (see the `links` property for details).
If processing has not finished yet and the `partial` parameter is not set to `true`
requests to this endpoint MUST be rejected an error.
tags:
- openEO
- OGC API - Processes
security:
- Bearer: []
parameters:
- name: partial
description: >-
**openEO only**: If set to `true`, the results endpoint returns incomplete results while
still running.
in: query
allowEmptyValue: true
schema:
type: boolean
default: false
responses:
'200':
description: >-
Provides the results.
content:
application/json:
schema:
oneOf:
- $ref: '#/components/schemas/ogc_results'
- $ref: '#/components/schemas/batch_job_result'
- title: Batch Job Results Response as STAC Collection
type: object
required:
- assets
allOf:
- $ref: '#/components/schemas/collection'
example:
stac_version: 1.0.0
id: a3cca2b2aa1e3b5b
title: NDVI based on Sentinel 2
description: Deriving minimum NDVI measurements over pixel time series of Sentinel 2
license: Apache-2.0
providers:
- name: Example Cloud Corp.
description: No further processing applied.
roles:
- producer
- licensor
- host
url: https://cloud.example
extent:
temporal:
interval:
- - 2019-08-24T14:15:22Z
- 2019-08-24T14:15:22Z
spatial:
bbox:
- - -180
- -90
- 180
- 90
assets:
preview.png:
href: 'https://geodatacube.example/api/v1/download/583fba8b2ce583fba8b2ce/preview.png'
type: image/png
title: Thumbnail
roles:
- thumbnail
process.json:
href: 'https://geodatacube.example/api/v1/download/583fba8b2ce583fba8b2ce/process.json'
type: application/json
title: Original Process
roles:
- process
- reproduction
1.tif:
href: 'https://geodatacube.example/api/v1/download/583fba8b2ce583fba8b2ce/1.tif'
type: image/tiff; application=geotiff
roles:
- data
2.tif:
href: 'https://geodatacube.example/api/v1/download/583fba8b2ce583fba8b2ce/2.tif'
type: image/tiff; application=geotiff
roles:
- data
inspire.xml:
href: 'https://geodatacube.example/api/v1/download/583fba8b2ce583fba8b2ce/inspire.xml'
type: application/xml
title: INSPIRE metadata
description: INSPIRE compliant XML metadata
roles:
- metadata
links:
- rel: canonical
type: application/json
href: https://geodatacube.example/api/v1/download/583fba8b2ce583fba8b2ce/collection.json
- rel: item
type: application/geo+json
href: https://geodatacube.example/api/v1/download/583fba8b2ce583fba8b2ce/item_1.json
- rel: item
type: application/geo+json
href: https://geodatacube.example/api/v1/download/583fba8b2ce583fba8b2ce/item_2.json
application/geo+json:
schema:
$ref: '#/components/schemas/batch_job_result'
'424':
description: >-
The request can't be fulfilled as the batch job failed. This request
will deliver the last error message that was produced by the batch job.
This HTTP code MUST be sent only when the job `status` is `error`.
content:
application/json:
schema:
$ref: '#/components/schemas/log_entry'
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
post:
summary: Start processing a batch job
operationId: start-job
description: |-
Adds a batch job to the processing queue to compute the results.
The result will be stored in the format specified in the process.
To specify the format use a process such as `save_result`.
The job status is set to `queued`, if processing doesn't start
instantly. The same applies if the job status is `canceled`, `finished`,
or `error`, which restarts the job and discards previous results if the
back-end doesn't reject the request with an error.
Clients SHOULD warn users and ask for confirmation if results may get
discarded.
* Once the processing starts the status is set to `running`.
* Once the data is available to download the status is set to
`finished`.
* Whenever an error occurs during processing, the status MUST be set to
`error`.
This endpoint has no effect if the job status is already `queued` or
`running`. In particular, it doesn't restart a running job. To restart
a queued or running job, processing MUST have been canceled before.
tags:
- openEO
security:
- Bearer: []
responses:
'202':
description: The creation of the resource has been queued successfully.
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
delete:
summary: Cancel processing a batch job
operationId: stop-job
description: |-
Cancels all related computations for this job at the back-end. It will
stop generating additional costs for processing.
A subset of processed results may be available for downloading depending
on the state of the job at the time it was canceled.
Results MUST NOT be deleted until the job processing is started again or
the job is completely deleted through a request to
`DELETE /jobs/{job_id}`.
This endpoint only has an effect if the job status is `queued` or
`running`.
The job status is set to `canceled` if the status was `running`
beforehand and partial or preliminary results are available to be
downloaded. Otherwise the status is set to `created`.
tags:
- openEO
security:
- Bearer: []
responses:
'204':
description: Processing the job has been successfully canceled.
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
/me:
get:
summary: Information about the authenticated user
operationId: describe-account
description: >-
Lists information about the authenticated user, e.g., the user id.
The endpoint MAY return the disk quota available to the user.
The endpoint MAY also return links related to user management
and the user profile, e.g., where payments are handled or the user profile
could be edited.
This endpoint MAY be extended to fulfil the specification of the [OpenID
Connect UserInfo
Endpoint](http://openid.net/specs/openid-connect-core-1_0.html#UserInfo).
tags:
- Account Management
security:
- Bearer: []
responses:
'200':
description: Information about the logged in user.
content:
application/json:
schema:
title: User Data
description: >-
Holds user information.
type: object
required:
- user_id
properties:
user_id:
type: string
description: >-
A unique user identifier specific to the back-end, which could either be chosen by a user or is automatically generated by the back-end during the registration process at the back-end.
It is meant to be used as an identifier in URIs (e.g., for sharing purposes) which is primarily used in machine-to-machine communication. Preferably use the human-readable property `name` to display the user's name in user interfaces instead of the user identifier.
pattern: '^[\w\-\.~]+$'
example: john_doe
name:
type: string
description: >-
The user name, a human-friendly displayable name. Could be
the user's real name or a nickname.
storage:
title: User Storage
description: Information about the storage space available to the user.
type: object
nullable: true
required:
- free
- quota
properties:
free:
type: integer
description: >-
Free storage space in bytes, which is still available
to the user. Effectively, this is the disk quota minus
the used space by the user, e.g., user-uploaded files
and job results.
example: 536870912
quota:
type: integer
description: >-
Maximum storage space (disk quota) in bytes available
to the user.
example: 1073741824
links:
description: |-
Links related to the user profile, e.g., where payments
are handled or the user profile could be edited.
It is RECOMMENDED to provide links with the following `rel` (relation) types:
1. `edit-form`: Points to a page where the user can edit his user profile;
2. `alternate`: Any other representation of these (and potentially additional)
user information, e.g, the (public) user profile page.
It is RECOMMENDED to add descriptive titles for a better user experience; and
3. `related`: Any other user-specific links to be shown in clients,
e.g., to user-specific settings, invoices, etc. It is RECOMMENDED to
add descriptive titles for a better user experience.
For additional relation types see also the lists of
[common relation types](#section/API-Principles/Web-Linking).
type: array
items:
$ref: '#/components/schemas/link'
example:
- href: 'https://geodatacube.example/john_doe/payment/'
rel: payment
- href: 'https://geodatacube.example/john_doe/edit/'
rel: edit-form
- href: 'https://geodatacube.example/john_doe/'
rel: alternate
type: text/html
title: User profile
- href: 'https://geodatacube.example/john_doe.vcf'
rel: alternate
type: text/vcard
title: vCard of John Doe
- href: 'https://geodatacube.example/john_doe/invoices'
rel: related
type: text/html
title: Invoices
4XX:
$ref: '#/components/responses/client_error_auth'
5XX:
$ref: '#/components/responses/server_error'
components:
schemas:
ogc_processSummary:
allOf:
- $ref: '#/components/schemas/descriptionType'
- required:
- id
- version
type: object
properties:
id:
type: string
version:
type: string
jobControlOptions:
type: array
items:
$ref: '#/components/schemas/jobControlOptions'
outputTransmission:
type: array
items:
$ref: '#/components/schemas/transmissionMode'
links:
type: array
items:
$ref: '#/components/schemas/link'
ogc_process:
allOf:
- $ref: '#/components/schemas/ogc_processSummary'
- type: object
properties:
inputs:
type: object
additionalProperties:
$ref: '#/components/schemas/inputDescription'
outputs:
type: object
additionalProperties:
$ref: '#/components/schemas/outputDescription'
ogc_execute:
type: object
properties:
inputs:
type: object
additionalProperties:
oneOf:
- $ref: '#/components/schemas/inlineOrRefData'
- type: array
items:
$ref: '#/components/schemas/inlineOrRefData'
outputs:
type: object
additionalProperties:
$ref: '#/components/schemas/ogc_output'
response:
type: string
default: raw
enum:
- raw
- document
subscriber:
$ref: '#/components/schemas/ogc_subscriber'
ogc_results:
title: OGC API Results
type: object
additionalProperties:
$ref: '#/components/schemas/inlineOrRefData'
ogc_statusInfo:
required:
- jobID
- status
- type
type: object
properties:
processID:
type: string
type:
type: string
enum:
- process
jobID:
type: string
status:
$ref: '#/components/schemas/ogc_statusCode'
message:
type: string
created:
type: string
format: date-time
started:
type: string
format: date-time
finished:
type: string
format: date-time
updated:
type: string
format: date-time
progress:
maximum: 100
minimum: 0
type: integer
links:
type: array
items:
$ref: '#/components/schemas/link'
ogc_statusCode:
type: string
nullable: false
enum:
- accepted
- running
- successful
- failed
- dismissed
ogc_output:
type: object
properties:
format:
$ref: '#/components/schemas/ogc_format'
transmissionMode:
$ref: '#/components/schemas/transmissionMode'
ogc_format:
type: object
properties:
mediaType:
type: string
encoding:
type: string
schema:
oneOf:
- type: string
format: url
- type: object
ogc_subscriber:
required:
- successUrl
type: object
properties:
successUri:
type: string
format: uri
inProgressUri:
type: string
format: uri
failedUri:
type: string
format: uri
description: |-
Optional URIs for callbacks for this job.
Support for this parameter is not required and the parameter may be
removed from the API definition, if conformance class **'callback'**
is not listed in the conformance declaration under `/conformance`.
inlineOrRefData:
oneOf:
- $ref: '#/components/schemas/inputValueNoObject'
- $ref: '#/components/schemas/qualifiedInputValue'
- $ref: '#/components/schemas/link'
inputValue:
oneOf:
- $ref: '#/components/schemas/inputValueNoObject'
- type: object
inputValueNoObject:
oneOf:
- type: string
- type: number
- type: integer
- type: boolean
- type: array
items:
type: string
- $ref: '#/components/schemas/binaryInputValue'
- $ref: '#/components/schemas/bbox'
binaryInputValue:
type: string
format: byte
qualifiedInputValue:
allOf:
- $ref: '#/components/schemas/ogc_format'
- required:
- value
type: object
properties:
value:
$ref: '#/components/schemas/inputValue'
inputDescription:
allOf:
- $ref: '#/components/schemas/descriptionType'
- required:
- schema
type: object
properties:
minOccurs:
type: integer
default: 1
maxOccurs:
oneOf:
- type: integer
default: 1
- type: string
enum:
- unbounded
schema:
$ref: '#/components/schemas/json_schema'
outputDescription:
allOf:
- $ref: '#/components/schemas/descriptionType'
- required:
- schema
type: object
properties:
schema:
$ref: '#/components/schemas/json_schema'
descriptionType:
type: object
properties:
title:
type: string
description:
type: string
keywords:
type: array
items:
type: string
metadata:
type: array
items:
$ref: '#/components/schemas/metadata'
additionalParameters:
allOf:
- $ref: '#/components/schemas/metadata'
- type: object
properties:
parameters:
type: array
items:
$ref: '#/components/schemas/additionalParameter'
jobControlOptions:
type: string
enum:
- sync-execute
- async-execute
- dismiss
transmissionMode:
type: string
default: value
enum:
- value
- reference
metadata:
type: object
properties:
title:
type: string
role:
type: string
href:
type: string
additionalParameter:
required:
- name
- value
type: object
properties:
name:
type: string
value:
type: array
items:
oneOf:
- type: string
- type: number
- type: integer
- type: array
items:
type: object
- type: object
extent-uad:
title: Extent with Uniform Additional Dimensions Schema
description: |-
The extent module only addresses spatial and temporal extents. This module extends extent by specifying how
intervals and crs properties can be used to specify additional geometries.
allOf:
- "$ref": "#/components/schemas/extent"
- type: object
additionalProperties:
description: The domain intervals for any additional dimensions of the extent
(envelope) beyond those described in temporal and spatial.
type: object
oneOf:
- required:
- interval
- crs
- required:
- interval
- trs
- required:
- interval
- vrs
properties:
interval:
description: |-
One or more intervals that describe the extent for this dimension of the dataset.
The value `null` is supported and indicates an unbounded or half-bounded interval.
The first interval describes the overall extent of the data for this dimension.
All subsequent intervals describe more precise intervals, e.g., to identify clusters of data.
Clients only interested in the overall extent will only need
to access the first item (a pair of lower and upper bound values).
type: array
minItems: 1
items:
description: |-
Lower and upper bound values of the interval. The values
are in the coordinate reference system specified in `crs`, `trs` or `vrs`.
type: array
minItems: 2
maxItems: 2
items:
oneOf:
- type: string
nullable: true
- type: number
crs:
type: string
description: generic coordinate reference system suitable for any type
of dimensions
trs:
type: string
description: temporal coordinate reference system (e.g., as defined by
Features for 'temporal')
vrs:
type: string
description: vertical coordinate reference system (e.g., as defined in
EDR for 'vertical')
crs:
title: CRS
oneOf:
- description: Simplification of the object into a url if the other properties
are not present
type: string
- type: object
oneOf:
- required:
- uri
properties:
uri:
description: Reference to one coordinate reference system (CRS)
type: string
format: uri
- required:
- wkt
properties:
wkt:
description: A string defining the CRS using the JSON encodng for Well
Known Text
type: object
- required:
- referenceSystem
properties:
referenceSystem:
description: A reference system data structure as defined in the MD_ReferenceSystem
of the ISO 19115
type: object
dataType:
oneOf:
- type: string
- type: string
enum:
- map
- vector
- coverage
domainSet:
type: object
title: domainSet
description: The domainSet describes the *direct positions* of the coverage,
i.e., the locations for which values are available.
oneOf:
- required:
- type
- generalGrid
properties:
type:
enum:
- DomainSet
generalGrid:
title: General Grid
description: A general n-D grid is defined through a sequence of axes,
each of which can be of a particular axis type.
type: object
required:
- type
additionalProperties: false
properties:
type:
enum:
- GeneralGridCoverage
id:
type: string
srsName:
type: string
format: uri
axisLabels:
type: array
items:
type: string
axis:
type: array
items:
type: object
oneOf:
- title: Index Axis
description: An Index Axis is an axis with only integer positions
allowed.
required:
- type
- axisLabel
- lowerBound
- upperBound
additionalProperties: false
properties:
type:
enum:
- IndexAxis
id:
type: string
axisLabel:
type: string
lowerBound:
type: number
upperBound:
type: number
- title: Regular Axis
description: A Regular Axis is an axis where all direct coordinates
are at a common distance from its immediate neighbors.
required:
- type
- axisLabel
- lowerBound
- upperBound
- resolution
- uomLabel
additionalProperties: false
properties:
type:
enum:
- RegularAxis
id:
type: string
axisLabel:
type: string
lowerBound:
type: string
upperBound:
type: string
uomLabel:
type: string
resolution:
type: number
- title: Irregular Axis
description: An irregular axis enumerates all possible direct
position coordinates.
required:
- type
- axisLabel
- uomLabel
- coordinate
additionalProperties: false
properties:
type:
enum:
- IrregularAxis
id:
type: string
axisLabel:
type: string
uomLabel:
type: string
coordinate:
type: array
items:
type: string
displacement:
title: Displacement
description: A Displacement is a warped axis nest where points on
the grid all have their individual direct position coordinates.
The sequenceRule element describes linearization order.
type: object
oneOf:
- required:
- type
- axisLabels
- uomLabels
- coordinates
properties:
type:
enum:
- DisplacementAxisNest
id:
type: string
axisLabel:
type: string
srsName:
type: string
format: uri
axisLabels:
type: array
items:
type: string
uomLabels:
type: array
items:
type: string
coordinates:
type: array
items:
type: array
items:
type: string
- required:
- type
- axisLabels
- uomLabels
- coordinatesRef
properties:
type:
enum:
- DisplacementAxisNestRef
id:
type: string
axisLabel:
type: string
srsName:
type: string
format: uri
axisLabels:
type: array
items:
type: string
uomLabels:
type: array
items:
type: string
coordinatesRef:
type: string
format: uri
model:
title: Sensor model
description: A Transformation By Sensor Model is a transformation
definition which is given by a SensorML 2.0 transformation specification.
type: object
required:
- type
- sensorModelRef
properties:
type:
enum:
- TransformationBySensorModel
id:
type: string
axisLabels:
type: array
items:
type: string
uomLabels:
type: array
items:
type: string
sensorModelRef:
type: string
format: uri
sensorInstanceRef:
type: string
format: uri
gridLimits:
title: Grid limits
description: This is the boundary of the array underlying the grid,
given by its diagonal corner points in integer _60_3D. The grid
limits can be omitted in case all axes are of type index axis, because
then the grid limit repeats the grid information in a redundant way. The purpose
of the axisLabels attribute, which lists the axis labels of all
axisExtent elements in proper sequence, is to enforce axis sequence
also in XML systems which do not preserve document order.
type: object
required:
- type
properties:
type:
enum:
- GridLimits
indexAxis:
title: Index Axis
description: An Index Axis is an axis with only integer positions
allowed.
type: object
required:
- type
- lowerBound
- upperBound
additionalProperties: false
properties:
type:
enum:
- IndexAxis
id:
type: string
axisLabel:
type: string
lowerBound:
type: number
upperBound:
type: number
srsName:
type: string
format: uri
axisLabels:
type: array
items:
type: string
- required:
- type
- directMultiPoint
properties:
type:
enum:
- DomainSet
directMultiPoint:
oneOf:
- required:
- type
- coordinates
properties:
type:
enum:
- DirectMultiPoint
coordinates:
type: array
items:
type: array
items:
type: string
- required:
- type
- coordinatesRef
properties:
type:
enum:
- DirectMultiPointRef
coordinatesRef:
type: string
format: uri
- required:
- type
- fileReference
properties:
type:
enum:
- DomainSetRef
id:
type: string
format: uri
fileReference:
type: string
format: uri
rangeType:
title: rangeType
description: The rangeType element describes the structure and semantics of
a coverage's range values, including (optionally) restrictions on the interpolation
allowed on such values.
type: object
oneOf:
- required:
- type
- field
properties:
type:
enum:
- DataRecord
field:
type: array
items:
title: DataRecord field
description: e.g., Quantity or Count
type: object
required:
- type
properties:
type:
enum:
- Quantity
- Count
id:
type: string
format: uri
name:
type: string
definition:
type: string
format: uri
uom:
title: units of measure
description: units of measure
type: object
required:
- type
- code
properties:
type:
enum:
- UnitReference
id:
type: string
format: uri
code:
type: string
constraint:
title: Constraint
description: Constraint
type: object
required:
- type
properties:
type:
enum:
- AllowedValues
id:
type: string
format: uri
interval:
type: array
items:
type: string
interpolationRestriction:
title: interpolationRestriction
description: Interpolation restriction
type: object
required:
- type
properties:
type:
enum:
- InterpolationRestriction
id:
type: string
format: uri
allowedInterpolation:
type: array
items:
type: string
format: uri
- required:
- type
- fileReference
properties:
type:
enum:
- RangeTypeRef
id:
type: string
format: uri
fileReference:
type: string
format: uri
rangeSet:
title: rangeSet
description: 'The rangeSet lists a value for each of the coverage''s direct
positions. Values resemble the *payload* information of some particular direct
positions. Values can be composite (with a single nesting level, i.e., composites
always consist of atomics) or atomic (emulated through single-component composites)
whereby the sequence, structure, and meaning of every value is defined through
the rangeType. Values can be represented in-line or by reference to an external
file which may have any suitable encoding.'
type: object
oneOf:
- required:
- type
- dataBlock
properties:
type:
enum:
- RangeSet
dataBlock:
title: dataBlock
description: Data block objects
type: object
required:
- type
- values
properties:
type:
enum:
- VDataBlock
- CVDataBlock
values:
type: array
items:
type: string
- required:
- type
- fileReference
properties:
type:
enum:
- RangeSetRef
fileReference:
type: array
items:
type: string
format: uri
coverageSchema:
title: Coverage object
description: 'Component of OGC Coverage Implementation Schema 1.1. Last updated:
2016-may-18. Copyright (c) 2016 Open Geospatial Consortium, Inc. All Rights
Reserved. To obtain additional rights of use, visit http://www.opengeospatial.org/legal/.'
type: object
oneOf:
- required:
- type
- domainSet
- rangeSet
- rangeType
properties:
id:
type: string
type:
enum:
- CoverageByDomainAndRange
envelope:
title: envelope
description: The envelope around a coverage is defined by the lower and
upper bound of each axis, respectively. The purpose of the axisLabels
attribute, which lists the axis labels of all axisExtent elements in
proper sequence, is to enforce axis sequence also in XML systems which
do not preserve document order.
type: object
required:
- type
- srsName
- axisLabels
- axis
properties:
type:
enum:
- EnvelopeByAxis
id:
type: string
srsName:
type: string
format: uri
axisLabels:
type: array
items:
type: string
axis:
type: array
items:
type: object
required:
- type
- lowerBound
- upperBound
- uomLabel
additionalProperties: false
properties:
type:
enum:
- AxisExtent
id:
type: string
axisLabel:
type: string
lowerBound:
oneOf:
- type: number
- type: string
nullable: true
- type: boolean
upperBound:
oneOf:
- type: number
- type: string
nullable: true
- type: boolean
uomLabel:
type: string
domainSet:
"$ref": "#/components/schemas/domainSet"
rangeSet:
"$ref": "#/components/schemas/rangeSet"
rangeType:
"$ref": "#/components/schemas/rangeType"
metadata:
title: Metadata
description: The metadata element is a container of any (not further specified)
information which should be transported along with the coverage on hand,
such as domain-specific metadata.
type: object
- required:
- type
- partitionSet
- rangeType
properties:
id:
type: string
type:
enum:
- CoverageByPartitioning
envelope:
"$ref": "#/components/schemas/coverageSchema/oneOf/0/properties/envelope"
partitionSet:
title: Partitioning Set
description: A partition describes how a coverage (*sub-coverage*) referenced
is located within referencing coverage (*super-coverage*). The sub-coverage
can be represented by referencing a coverage id or a URL pointing to
a coverage. Such sub-coverages referenced may be grouped into the super-coverage
document, or reside remote, or mixed. As an additional alternative,
single range values can be indicated verbatim, together with values'
direct position. All values must share an identical structure and conform
to the rangeType definition.
type: object
required:
- type
properties:
type:
enum:
- PartitionSet
partition:
type: array
items:
type: object
oneOf:
- required:
- type
- coverageRef
properties:
id:
type: string
type:
enum:
- PartitionRef
envelope:
"$ref": "#/components/schemas/coverageSchema/oneOf/0/properties/envelope"
coverageRef:
type: string
format: uri
- required:
- type
- coverage
properties:
id:
type: string
type:
enum:
- Partition
envelope:
"$ref": "#/components/schemas/coverageSchema/oneOf/0/properties/envelope"
coverage:
type: object
positionValuePair:
type: array
items:
type: object
required:
- type
- coordinate
- value
properties:
id:
type: string
type:
enum:
- PVP
coordinate:
type: array
items:
oneOf:
- type: number
- type: string
- type: boolean
value:
type: array
items:
oneOf:
- type: number
- type: string
nullable: true
- type: boolean
rangeType:
"$ref": "#/components/schemas/rangeType"
metadata:
"$ref": "#/components/schemas/coverageSchema/oneOf/0/properties/metadata"
tileSet:
title: Tile Set Metadata
description: A resource describing a tileset based on the OGC TileSet Metadata
Standard. At least one of the 'TileMatrixSet', or a link with 'rel' http://www.opengis.net/def/rel/ogc/1.0/tiling-scheme
type: object
required:
- dataType
- crs
- links
properties:
title:
description: A title for this tileset
type: string
description:
description: Brief narrative description of this tile set
type: string
dataType:
allOf:
- description: Type of data represented in the tileset
- "$ref": "#/components/schemas/dataType"
crs:
allOf:
- description: Coordinate Reference System (CRS)
- "$ref": "#/components/schemas/crs"
tileMatrixSetURI:
description: Reference to a Tile Matrix Set on an official source for Tile
Matrix Sets such as the OGC NA definition server (http://www.opengis.net/def/tms/).
Required if the tile matrix set is registered on an open official source.
type: string
format: uri
links:
description: 'Links to related resources. Possible link ''rel'' values are:
''http://www.opengis.net/def/rel/ogc/1.0/dataset'' for a URL pointing
to the dataset, ''item'' for a URL template to get a tile; ''alternate''
for a URL pointing to another representation of the TileSetMetadata (e.g,
a TileJSON file); ''http://www.opengis.net/def/rel/ogc/1.0/tiling-scheme''
for a definition of the TileMatrixSet; ''http://www.opengis.net/def/rel/ogc/1.0/geodata''
for pointing to a single collection (if the tileset represents a single
collection)'
type: array
items:
"$ref": "#/components/schemas/link"
tileMatrixSetLimits:
description: Limits for the TileRow and TileCol values for each TileMatrix
in the tileMatrixSet. If missing, there are no limits other that the ones
imposed by the TileMatrixSet. If present, the TileMatrices listed are limited
and the rest not available at all.
type: array
items:
"$ref": "#/components/schemas/tileMatrixLimits"
epoch:
description: Epoch of the Coordinate Reference System (CRS)
type: number
layers:
minItems: 1
type: array
items:
type: object
required:
- id
- dataType
properties:
title:
description: Title of this tile matrix set, normally used for display
to a human.
type: string
description:
description: Brief narrative description of this tile matrix set,
normally available for display to a human.
type: string
keywords:
description: Unordered list of one or more commonly used or formalized
word(s) or phrase(s) used to describe this layer.
type: string
id:
description: Unique identifier of the Layer. Implementation of 'identifier'
type: string
dataType:
allOf:
- description: Type of data represented in the layer
- "$ref": "#/components/schemas/dataType"
geometryDimension:
description: 'The geometry dimension of the features shown in this
layer (0: points, 1: curves, 2: surfaces, 3: solids), unspecified:
mixed or unknown'
type: integer
minimum: 0
maximum: 3
featureType:
description: Feature type identifier. Only applicable to layers of
datatype 'geometries'
type: string
pointOfContact:
description: Useful information to contact the authors or custodians
for the layer (e.g., e-mail address, a physical address, phone numbers,
etc)
type: string
publisher:
description: Organization or individual responsible for making the
layer available
type: string
theme:
description: Category where the layer can be grouped
type: string
crs:
allOf:
- description: Coordinate Reference System (CRS)
- "$ref": "#/components/schemas/crs"
epoch:
description: Epoch of the Coordinate Reference System (CRS)
type: number
minScaleDenominator:
description: Minimum scale denominator for usage of the layer
type: number
maxScaleDenominator:
description: Maximum scale denominator for usage of the layer
type: number
minCellSize:
description: Minimum cell size for usage of the layer
type: number
maxCellSize:
description: Maximum cell size for usage of the layer
type: number
maxTileMatrix:
description: TileMatrix identifier associated with the minScaleDenominator
type: string
minTileMatrix:
description: TileMatrix identifier associated with the maxScaleDenominator
type: string
boundingBox:
allOf:
- description: Minimum bounding rectangle surrounding the layer
- "$ref": "#/components/schemas/2DBoundingBox"
created:
allOf:
- description: When the layer was first produced
- "$ref": "#/components/schemas/timeStamp"
updated:
allOf:
- description: Last layer change/revision
- "$ref": "#/components/schemas/timeStamp"
style:
allOf:
- description: Style used to generate the layer in the tileset
- "$ref": "#/components/schemas/tileSet/properties/style/allOf/1"
geoDataClasses:
description: URI identifying a class of data contained in this layer
(useful to determine compatibility with styles or processes)
type: array
items:
type: string
propertiesSchema:
allOf:
- description: Properties represented by the features in this layer.
Can be the attributes of a feature dataset (datatype=geometries)
or the rangeType of a coverage (datatype=coverage)
- description: Attributes of the features or rangetypes of a coverage.
Defined by a subset of the JSON Schema for the properties of a
feature
type: object
required:
- type
- properties
properties:
type:
type: string
enum:
- object
required:
description: Implements 'multiplicity' by citing property 'name'
defined as 'additionalProperties'
type: array
minItems: 1
items:
type: string
properties:
type: object
default: {}
additionalProperties:
description: No property names are defined but any property
name they should be described by JSON Schema. So 'additionalProperties'
implements 'name'.
type: object
properties:
title:
type: string
description:
description: Implements 'description'
type: string
type:
type: string
enum:
- array
- boolean
- integer
- 'null'
- number
- object
- string
enum:
description: Implements 'acceptedValues'
type: array
minItems: 1
items: {}
uniqueItems: true
format:
description: Complements implementation of 'type'
type: string
contentMediaType:
description: Implements 'mediaType'
type: string
maximum:
description: Implements 'range'
type: number
exclusiveMaximum:
description: Implements 'range'
type: number
minimum:
description: Implements 'range'
type: number
exclusiveMinimum:
description: Implements 'range'
type: number
pattern:
type: string
format: regex
maxItems:
description: Implements 'upperMultiplicity'
type: integer
minimum: 0
minItems:
description: Implements 'lowerMultiplicity'
type: integer
default: 0
minimum: 0
observedProperty:
type: string
observedPropertyURI:
type: string
format: uri
uom:
type: string
uomURI:
type: string
format: uri
links:
description: 'Links related to this layer. Possible link ''rel'' values
are: ''geodata'' for a URL pointing to the collection of geospatial
data.'
type: array
minItems: 1
items:
"$ref": "#/components/schemas/link"
boundingBox:
allOf:
- description: Minimum bounding rectangle surrounding the tile matrix set,
in the supported CRS
- "$ref": "#/components/schemas/2DBoundingBox"
centerPoint:
allOf:
- description: Location of a tile that nicely represents the tileset. Implementations
may use this center value to set the default location or to present
a representative tile in a user interface
- type: object
required:
- coordinates
properties:
coordinates:
type: array
minItems: 2
maxItems: 2
items:
type: number
crs:
allOf:
- description: Coordinate Reference System (CRS) of the coordinates
- "$ref": "#/components/schemas/crs"
tileMatrix:
description: TileMatrix identifier associated with the scaleDenominator
type: string
scaleDenominator:
description: Scale denominator of the tile matrix selected
type: number
cellSize:
description: Cell size of the tile matrix selected
type: number
style:
allOf:
- description: Style involving all layers used to generate the tileset
- type: object
required:
- id
properties:
id:
description: An identifier for this style. Implementation of 'identifier'
type: string
title:
description: A title for this style
type: string
description:
description: Brief narrative description of this style
type: string
keywords:
description: keywords about this style
type: array
items:
type: string
links:
description: 'Links to style related resources. Possible link ''rel''
values are: ''style'' for a URL pointing to the style description,
''styleSpec'' for a URL pointing to the specification or standard
used to define the style.'
type: array
minItems: 1
items:
"$ref": "#/components/schemas/link"
license:
description: License applicable to the tiles
type: string
accessConstraints:
description: Restrictions on the availability of the Tile Set that the user
needs to be aware of before using or redistributing the Tile Set
type: string
default: unclassified
enum:
- unclassified
- restricted
- confidential
- secret
- topSecret
keywords:
description: keywords about this tileset
type: array
items:
type: string
version:
description: Version of the Tile Set. Changes if the data behind the tiles
has been changed
type: string
created:
allOf:
- description: When the Tile Set was first produced
- "$ref": "#/components/schemas/timeStamp"
updated:
allOf:
- description: Last Tile Set change/revision
- "$ref": "#/components/schemas/timeStamp"
pointOfContact:
description: Useful information to contact the authors or custodians for
the Tile Set
type: string
mediaTypes:
description: Media types available for the tiles
type: array
items:
type: string
tileSet-item:
title: Tile Set Metadata item
description: A minimal tileset element for use within a list of tilesets linking
to full description of those tilesets.
type: object
required:
- dataType
- links
- crs
properties:
title:
description: A title for this tileset
type: string
dataType:
allOf:
- description: Type of data represented in the tileset
- "$ref": "#/components/schemas/dataType"
crs:
allOf:
- description: Coordinate Reference System (CRS)
- "$ref": "#/components/schemas/crs"
tileMatrixSetURI:
description: Reference to a Tile Matrix Set on an offical source for Tile
Matrix Sets such as the OGC NA definition server (http://www.opengis.net/def/tms/).
Required if the tile matrix set is registered on an open official source.
type: string
format: uri
links:
description: Links to related resources. A 'self' link to the tileset as
well as a 'http://www.opengis.net/def/rel/ogc/1.0/tiling-scheme' link
to a definition of the TileMatrixSet are required.
type: array
items:
"$ref": "#/components/schemas/link"
tileMatrixLimits:
title: TileMatrixLimits
description: A resource describing useful to create an array that describes
the limits for a tile set TileMatrixSet based on the OGC TileSet Metadata
Standard
type: object
required:
- tileMatrix
- minTileRow
- maxTileRow
- minTileCol
- maxTileCol
properties:
tileMatrix:
type: string
minTileRow:
type: number
format: integer
minimum: 0
maxTileRow:
type: number
format: integer
minimum: 0
minTileCol:
type: number
format: integer
minimum: 0
maxTileCol:
type: number
format: integer
minimum: 0
2DPoint:
description: A 2D Point in the CRS indicated elsewhere
type: array
minItems: 2
maxItems: 2
items:
type: number
2DBoundingBox:
description: Minimum bounding rectangle surrounding a 2D resource in the CRS
indicated elsewhere
type: object
required:
- lowerLeft
- upperRight
properties:
lowerLeft:
"$ref": "#/components/schemas/2DPoint"
upperRight:
"$ref": "#/components/schemas/2DPoint"
crs:
"$ref": "#/components/schemas/crs"
orderedAxes:
type: array
minItems: 2
maxItems: 2
items:
type: string
tileMatrixSets:
type: string
enum:
- WebMercatorQuad
- WorldCRS84Quad
- GNOSISGlobalGrid
- WorldMercatorWGS84Quad
numberMatched:
description: |-
The number of features of the feature type that match the selection
parameters like `bbox`.
type: integer
minimum: 0
example: 127
numberReturned:
description: |-
The number of features in the feature collection.
A server may omit this information in a response, if the information
about the number of features is not known or difficult to compute.
If the value is provided, the value must be identical to the number
of items in the "features" array.
type: integer
minimum: 0
example: 10
timeStamp:
description: This property indicates the time and date when the response was generated.
type: string
format: date-time
example: "2017-08-17T08:05:32Z"
conformsTo:
description: |-
Lists all conformance classes specified in various standards that the
implementation conforms to. Conformance classes are commonly used in
all OGC APIs and the STAC API specification.
type: array
items:
type: string
format: uri
example:
- https://api.geodatacube.example/1.0.0-beta
- https://api.stacspec.org/v1.0.0/core
- https://api.stacspec.org/v1.0.0/collections
- https://api.stacspec.org/v1.0.0/ogcapi-features
- http://www.opengis.net/spec/ogcapi-common-1/1.0/conf/core
- http://www.opengis.net/spec/ogcapi-common-1/1.0/conf/json
- http://www.opengis.net/spec/ogcapi-common-1/1.0/conf/oas30
- http://www.opengis.net/spec/ogcapi-common-2/1.0/conf/collections
- http://www.opengis.net/spec/ogcapi-features-1/1.0/conf/core
- http://www.opengis.net/spec/ogcapi-features-1/1.0/conf/oas30
- http://www.opengis.net/spec/ogcapi-features-1/1.0/conf/geojson
- http://www.opengis.net/spec/ogcapi-coverages-1/1.0/conf/geodata-coverage
- http://www.opengis.net/spec/ogcapi-coverages-1/1.0/conf/cisjson
- http://www.opengis.net/spec/ogcapi-coverages-1/1.0/conf/coverage-subset
- http://www.opengis.net/spec/ogcapi-coverages-1/1.0/conf/oas30
stac_item_type:
type: string
description: >-
The GeoJSON type that applies to this metadata document,
which MUST always be a "Feature" according to the STAC specification.
This type does **not** describe the spatial data type of the assets.
enum:
- Feature
stac_item_geometry:
description: |-
Defines the full footprint of the assets represented by this item as
GeoJSON Geometry.
Results without a known location can set this value to `null`.
nullable: true
allOf:
- $ref: '#/components/schemas/GeoJsonGeometry'
example:
type: Polygon
coordinates:
- - - -180
- -90
- - 180
- -90
- - 180
- 90
- - -180
- 90
- - -180
- -90
stac_item_properties:
type: object
title: Item Properties
description: >-
MAY contain additional properties other than the required property `datetime`,
e.g., custom properties or properties from the STAC specification or STAC extensions.
required:
- datetime
additionalProperties: true
properties:
datetime:
title: Date and Time
description: >-
The searchable date/time of the data, in UTC. Formatted as a
[RFC 3339](https://www.rfc-editor.org/rfc/rfc3339.html) date-time.
If this field is set to `null` (usually for larger time ranges),
it is STRONGLY RECOMMENDED to specify both `start_datetime` and
`end_datetime` for STAC compliance.
type: string
format: date-time
nullable: true
start_datetime:
type: string
format: date-time
description: >-
For time series: The first or start date and time for the data,
in UTC. Formatted as a [RFC
3339](https://www.rfc-editor.org/rfc/rfc3339.html) date-time.
end_datetime:
type: string
format: date-time
description: >-
For time series: The last or end date and time for the data, in
UTC. Formatted as a [RFC 3339](https://www.rfc-editor.org/rfc/rfc3339.html)
date-time.
title:
$ref: '#/components/schemas/eo_title'
description:
$ref: '#/components/schemas/eo_description'
license:
$ref: '#/components/schemas/stac_license'
providers:
$ref: '#/components/schemas/stac_providers'
created:
$ref: '#/components/schemas/created'
updated:
$ref: '#/components/schemas/updated'
expires:
type: string
format: date-time
description: >-
Time until which the assets are accessible, in UTC. Formatted as
a [RFC 3339](https://www.rfc-editor.org/rfc/rfc3339.html) date-time.
example: '2020-11-01T00:00:00Z'
stac_item:
title: A STAC Item
description: The STAC specification should be the main guidance for implementing this.
type: object
required:
- stac_version
- id
- type
- geometry
- properties
- assets
- links
properties:
stac_version:
$ref: '#/components/schemas/stac_version'
stac_extensions:
$ref: '#/components/schemas/stac_extensions'
id:
type: string
type:
$ref: '#/components/schemas/stac_item_type'
bbox:
$ref: '#/components/schemas/bbox'
geometry:
$ref: '#/components/schemas/stac_item_geometry'
properties:
$ref: '#/components/schemas/stac_item_properties'
assets:
$ref: '#/components/schemas/stac_assets'
links:
$ref: '#/components/schemas/links'
batch_job_result:
title: openEO - Batch Job Results Response as STAC Item
description:
The STAC specification should be the main guidance for implementing this.
Specifying the `bbox` is strongly RECOMMENDED, but can be omitted if the
result is unlocated and the `geometry` is set to `null`.
type: object
required:
- stac_version
- id
- type
- geometry
- properties
- assets
- links
properties:
stac_version:
$ref: '#/components/schemas/stac_version'
stac_extensions:
$ref: '#/components/schemas/stac_extensions'
id:
$ref: '#/components/schemas/job_id'
type:
$ref: '#/components/schemas/stac_item_type'
bbox:
$ref: '#/components/schemas/bbox'
geometry:
$ref: '#/components/schemas/stac_item_geometry'
properties:
$ref: '#/components/schemas/stac_item_properties'
assets:
$ref: '#/components/schemas/stac_assets'
links:
type: array
description: |-
Links related to this batch job result, e.g., a link to an
invoice, additional log files or external documentation.
The links MUST NOT contain links to the processed and
downloadable data. Instead specify these in the `assets` property.
Clients MUST NOT download the data referenced in the links by
default.
It is **strongly recommended** to add a link with relation type
`canonical`, which points to this STAC document using a signed URL.
This way the STAC metadata can be used by other clients
without additional authentication steps.
For relation types see the lists of
[common relation types](#section/API-Principles/Web-Linking).
items:
$ref: '#/components/schemas/link'
example:
- rel: canonical
type: application/geo+json
href: https://geodatacube.example/api/v1/download/583fba8b2ce583fba8b2ce/item.json
file_format:
x-additionalPropertiesName: File Format Name
title: File Format
type: object
description: Describes a specific file format.
required:
- gis_data_types
- parameters
properties:
title:
$ref: '#/components/schemas/object_title'
description:
$ref: '#/components/schemas/description'
gis_data_types:
type: array
description: >-
Specifies the supported GIS spatial data types for this format.
minItems: 1
items:
type: string
enum:
- raster
- vector
- table
- pointcloud
- other
deprecated:
$ref: '#/components/schemas/deprecated'
experimental:
$ref: '#/components/schemas/experimental'
parameters:
title: File Format Parameters
description: Specifies the supported parameters for this file format.
type: object
additionalProperties:
$ref: '#/components/schemas/resource_parameter'
links:
type: array
description: |-
Links related to this file format, e.g., external documentation.
For relation types see the lists of
[common relation types](#section/API-Principles/Web-Linking).
items:
$ref: '#/components/schemas/link'
links_pagination:
description: |-
Links related to this list of resources, for example, links for pagination
or alternative formats such as a human-readable HTML version.
The links array MUST NOT be paginated.
If pagination is implemented, the following `rel` (relation) types apply:
1. `next` (REQUIRED): A link to the next page, except on the last page.
2. `prev` (OPTIONAL): A link to the previous page, except on the first page.
3. `first` (OPTIONAL): A link to the first page, except on the first page.
4. `last` (OPTIONAL): A link to the last page, except on the last page.
For additional relation types see also the lists of
[common relation types](#section/API-Principles/Web-Linking).
type: array
items:
$ref: '#/components/schemas/link'
links:
description: |-
Links related to this list of resources, for example, links for pagination
or alternative formats such as a human-readable HTML version.
The links array MUST NOT be paginated.
For relation types see also the lists of
[common relation types](#section/API-Principles/Web-Linking).
type: array
items:
$ref: '#/components/schemas/link'
link:
title: Link
description: >-
A link to another resource on the web. Bases on [RFC
5899](https://www.rfc-editor.org/rfc/rfc5988.html).
type: object
required:
- href
- rel
properties:
rel:
type: string
description: >-
Relationship between the current document and the linked document.
SHOULD be a [registered link relation
type](https://www.iana.org/assignments/link-relations/link-relations.xml)
whenever feasible.
example: related
href:
type: string
description: The value MUST be a valid URL.
format: uri
example: 'https://geodatacube.example'
type:
type: string
description: >-
The value MUST be a string that hints at the format used to
represent data at the provided URI, preferably a media (MIME) type.
example: text/html
title:
type: string
description: Used as a human-readable label for a link.
example: Example title
asset:
title: STAC Asset
type: object
required:
- href
properties:
href:
title: Asset location
description: >-
URL to the downloadable asset.
The URLs SHOULD be available without authentication so that
external clients can download the URLs easily.
If the data is confidential, signed URLs SHOULD be used to protect
against unauthorized access from third parties.
type: string
title:
description: The displayed title for clients and users.
type: string
description:
type: string
format: commonmark
description: |-
Multi-line description to explain the asset.
[CommonMark 0.29](http://commonmark.org/) syntax MAY be used for rich
text representation.
type:
title: Media Type
description: Media type of the asset.
type: string
example: image/tiff; application=geotiff
roles:
type: array
items:
type: string
description: |-
Purposes of the asset. Can be any value, but commonly used values are:
* `thumbnail`: A visualization of the data, usually a lower-resolution true color image in JPEG or PNG format;
* `reproducibility`: Information how the data was produced and/or can be reproduced, e.g, the process graph used to compute the data in JSON format;
* `data`: The computed data in the format specified by the user in the process graph (applicable in `GET /jobs/{job_id}/results` only); and
* `metadata`: Additional metadata available for the computed data.
example:
- data
stac_extent:
allOf:
- $ref: '#/components/schemas/extent'
- required:
- spatial
- temporal
extent:
type: object
title: Collection Extent
description: |-
The extent of the data in the collection. Additional members MAY
be added to represent other extents, for example, thermal or
pressure ranges.
The first item in the array always describes the overall extent of
the data. All subsequent items describe more precise extents,
e.g., to identify clusters of data.
Clients only interested in the overall extent will only need to
access the first item in each array.
properties:
spatial:
title: Collection Spatial Extent
description: >-
The spatial extents of the data in the
collection.
type: object
properties:
bbox:
description: |-
One or more bounding boxes that describe the spatial extent
of the dataset.
The first bounding box describes the overall spatial extent
of the data. All subsequent bounding boxes describe more
precise bounding boxes, e.g., to identify clusters of data.
Clients only interested in the overall spatial extent will
only need to access the first item in each array.
type: array
minItems: 1
items:
$ref: '#/components/schemas/bbox'
crs:
description: |-
Coordinate reference system of the coordinates in the spatial extent
(property `bbox`). The default reference system is WGS 84 longitude/latitude.
In the Core the only other supported coordinate reference system is
WGS 84 longitude/latitude/ellipsoidal height for coordinates with height.
Extensions may support additional coordinate reference systems and add
additional enum values.
type: string
enum:
- http://www.opengis.net/def/crs/OGC/1.3/CRS84
- http://www.opengis.net/def/crs/OGC/0/CRS84h
default: http://www.opengis.net/def/crs/OGC/1.3/CRS84
grid:
description: |-
Provides information about the limited availability of data within the collection organized
as a grid (regular or irregular) along each spatial dimension.
type: array
minItems: 2
maxItems: 3
items:
type: object
properties:
coordinates:
description: |-
List of coordinates along the dimension for which data organized as an irregular grid in the collection is available
(e.g., 2, 10, 80, 100).
type: array
minItems: 1
items:
oneOf:
- type: string
nullable: true
- type: number
example:
- 2
- 10
- 80
- 100
cellsCount:
description: |-
Number of samples available along the dimension for data organized as a regular grid.
For values representing the whole area of contiguous cells spanning _resolution_ units along the dimension, this will be (_upperBound_ - _lowerBound_) / _resolution_.
For values representing infinitely small point cells spaced by _resolution_ units along the dimension, this will be (_upperBound_ - _lowerBound_) / _resolution_ + 1.
type: integer
example: 50
resolution:
description: Resolution of regularly gridded data along the dimension in the collection
oneOf:
- type: string
nullable: true
- type: number
example: 0.0006866455078
temporal:
title: Collection Temporal Extent
description: >-
The temporal extents of the data in the
collection.
type: object
properties:
interval:
description: |-
One or more time intervals that describe the temporal extent
of the dataset.
The first time interval describes the overall temporal extent
of the data. All subsequent time intervals describe more
precise time intervals, e.g., to identify clusters of data.
Clients only interested in the overall extent will only need
to access the first item in each array.
type: array
minItems: 1
items:
description: |-
Begin and end times of the time interval. The coordinate
reference system is the Gregorian calendar.
The value `null` is supported and indicates an open time
interval.
type: array
minItems: 2
maxItems: 2
items:
type: string
format: date-time
nullable: true
example:
- '2011-11-11T12:22:11Z'
- null
trs:
description: |-
Coordinate reference system of the coordinates in the temporal extent
(property `interval`). The default reference system is the Gregorian calendar.
In the Core this is the only supported temporal coordinate reference system.
Extensions may support additional temporal coordinate reference systems and add
additional enum values.
type: string
enum:
- http://www.opengis.net/def/uom/ISO-8601/0/Gregorian
default: http://www.opengis.net/def/uom/ISO-8601/0/Gregorian
additionalProperties:
description: The domain intervals for any additional dimensions of the extent (envelope) beyond those described in temporal and spatial.
type: object
oneOf:
- required:
- interval
- crs
- required:
- interval
- trs
- required:
- interval
- vrs
properties:
interval:
description: |-
One or more intervals that describe the extent for this dimension of the dataset.
The value `null` is supported and indicates an unbounded or half-bounded interval.
The first interval describes the overall extent of the data for this dimension.
All subsequent intervals describe more precise intervals, e.g., to identify clusters of data.
Clients only interested in the overall extent will only need
to access the first item (a pair of lower and upper bound values).
type: array
minItems: 1
items:
description: |-
Lower and upper bound values of the interval. The values
are in the coordinate reference system specified in `crs`, `trs` or `vrs`.
type: array
minItems: 2
maxItems: 2
items:
oneOf:
- type: string
nullable: true
- type: number
crs:
type: string
description: generic coordinate reference system suitable for any type of dimensions
trs:
type: string
description: temporal coordinate reference system (e.g., as defined by Features for 'temporal')
vrs:
type: string
description: vertical coordinate reference system (e.g., as defined in EDR for 'vertical')
grid:
type: object
description: Provides information about the limited availability of data within the collection organized as a grid (regular or irregular) along the dimension.
properties:
coordinates:
description: |-
List of coordinates along the temporal dimension for which data organized as an irregular grid in the collection is available
(e.g., 2, 10, 80, 100).
type: array
minItems: 1
items:
oneOf:
- type: string
nullable: true
- type: number
example:
- 2
- 10
- 80
- 100
cellsCount:
description: |-
Number of samples available along the dimension for data organized as a regular grid.
For values representing the whole area of contiguous cells spanning _resolution_ units along the dimension, this will be (_upperBound_ - _lowerBound_) / _resolution_.
For values representing infinitely small point cells spaced by _resolution_ units along the dimension, this will be (_upperBound_ - _lowerBound_) / _resolution_ + 1.
type: integer
example: 50
resolution:
description: Resolution of regularly gridded data along the dimension in the collection
oneOf:
- type: string
nullable: true
- type: number
example:
- PT1H
- 0.0006866455078
collection:
title: Coverages Collection
type: object
required:
- id
- extent
- links
properties:
id:
$ref: '#/components/schemas/collection_id'
title:
type: string
description: A short descriptive one-line title for the collection.
description:
type: string
format: commonmark
description: |-
Detailed multi-line description to explain the collection.
[CommonMark 0.29](http://commonmark.org/) syntax MAY be used for
rich text representation.
extent:
$ref: '#/components/schemas/extent'
links:
description: |-
Links related to this collection.
Could reference to licensing information, other meta data formats with
additional information or a preview image.
It is RECOMMENDED to provide links with the following
`rel` (relation) types:
1. `root` and `parent`: URL to the data discovery endpoint at `/collections`;
2. `license`: A link to the license(s) SHOULD be specified if the `license`
field is set to `proprietary` or `various`;
3. `example`: Links to examples of processes that use this collection;
4. `latest-version`: If a collection has been marked as deprecated, a link SHOULD
point to the latest version of the collection. The relation types `predecessor-version`
(link to older version) and `successor-version` (link to newer version) can also be used
to show the relation between versions;
5. `alternate`: An alternative representation of the collection.
For example, this could be the collection available through another
catalog service such as OGC CSW, a human-readable HTML version or a
metadata document following another standard such as ISO 19115 or DCAT; and
6. `http://www.opengis.net/def/rel/ogc/1.0/queryables`: URL to the
queryables endpoint at `/collections/{collection_id}/queryables`.
For JSON Schema documents, the `type` field must be set to `application/schema+json`.
For additional relation types see also the lists of
[common relation types](#section/API-Principles/Web-Linking)
and the STAC specification for Collections.
type: array
items:
$ref: '#/components/schemas/link'
itemType:
description: indicator about the type of the items in the collection if the collection has an accessible /collections/{collectionId}/items endpoint
type: string
crs:
description: the list of coordinate reference systems supported by the API; the first item is the default coordinate reference system
type: array
items:
type: string
default:
- http://www.opengis.net/def/crs/OGC/1.3/CRS84
example:
- http://www.opengis.net/def/crs/OGC/1.3/CRS84
- http://www.opengis.net/def/crs/EPSG/0/4326
dataType:
allOf:
- description: Type of data represented in the collection
- $ref: '#/components/schemas/dataType'
geometryDimension:
description: 'The geometry dimension of the features shown in this layer (0: points, 1: curves, 2: surfaces, 3: solids), unspecified: mixed or unknown'
type: integer
minimum: 0
maximum: 3
minScaleDenominator:
description: Minimum scale denominator for usage of the collection
type: number
maxScaleDenominator:
description: Maximum scale denominator for usage of the collection
type: number
minCellSize:
description: Minimum cell size for usage of the collection
type: number
maxCellSize:
description: Maximum cell size for usage of the collection
type: number
stac_collection:
title: STAC / openEO Collection
type: object
required:
- stac_version
- type
- description
- license
- links
properties:
stac_version:
$ref: '#/components/schemas/stac_version'
stac_extensions:
$ref: '#/components/schemas/stac_extensions'
type:
type: string
enum:
- Collection
keywords:
type: array
description: List of keywords describing the collection.
items:
type: string
license:
$ref: '#/components/schemas/stac_license'
providers:
$ref: '#/components/schemas/stac_providers'
extent:
$ref: '#/components/schemas/stac_extent'
'cube:dimensions':
title: STAC Collection Cube Dimensions
description: |-
The named default dimensions of the data cube.
Names must be unique per collection.
The keys of the object are the dimension names. For
interoperability, it is RECOMMENDED to use the
following dimension names if there is only a single
dimension with the specified criteria:
* `x` for the dimension of type `spatial` with the axis set to `x`
* `y` for the dimension of type `spatial` with the axis set to `y`
* `z` for the dimension of type `spatial` with the axis set to `z`
* `t` for the dimension of type `temporal`
* `bands` for dimensions of type `bands`
* `geometry` for dimensions of type `geometry`
This property REQUIRES adding a version of the data cube extension to the list
of `stac_extensions`, e.g., `https://stac-extensions.github.io/datacube/v2.2.0/schema.json`.
type: object
additionalProperties:
x-additionalPropertiesName: Dimension Name
allOf:
- $ref: '#/components/schemas/dimension'
summaries:
title: STAC Summaries (Collection Properties)
description: |-
Collection properties from STAC extensions (e.g., EO,
SAR, Satellite or Scientific) or even custom extensions.
Summaries are either a unique set of all available
values, statistics *or* a JSON Schema. Statistics only
specify the range (minimum and maximum values) by default,
but can optionally be accompanied by additional
statistical values. The range can specify the
potential range of values, but it is recommended to be
as precise as possible. The set of values MUST contain
at least one element and it is strongly RECOMMENDED to
list all values. It is recommended to list as many
properties as reasonable so that consumers get a full
overview of the Collection. Properties that are
covered by the Collection specification (e.g.,
`providers` and `license`) SHOULD NOT be repeated in the
summaries.
Potential fields for the summaries can be found here:
* **[STAC Common Metadata](https://github.com/radiantearth/stac-spec/blob/v1.0.0/item-spec/common-metadata.md)**:
A list of commonly used fields throughout all domains
* **[Content Extensions](https://github.com/radiantearth/stac-spec/blob/v1.0.0/extensions/README.md#list-of-content-extensions)**:
Domain-specific fields for domains such as EO, SAR and point clouds.
* **Custom Properties**:
It is generally allowed to add custom fields.
type: object
additionalProperties:
oneOf:
- type: array
title: Set of values
items:
description: A value of any type.
- $ref: '#/components/schemas/collection_summary_stats'
- $ref: '#/components/schemas/json_schema'
assets:
description: |-
Dictionary of asset objects for data that can be downloaded,
each with a unique key.
The keys MAY be used by clients as file names.
allOf:
- $ref: '#/components/schemas/stac_assets'
stac_version:
type: string
description: >-
The [version of the STAC specification](https://github.com/radiantearth/stac-spec/releases),
which MAY not be equal to the [STAC API version](#tag/EO-Data-Discovery/STAC).
Supports versions 1.x.x.
pattern: '^1\.\d+.\d+'
example: 1.0.0
stac_extensions:
type: array
description: >-
A list of implemented STAC extensions. The list contains URLs to the
JSON Schema files it can be validated against. For STAC < 1.0.0-rc.1
shortcuts such as `sar` can be used instead of the schema URL.
uniqueItems: true
items:
anyOf:
- title: Reference to a JSON Schema
type: string
format: uri
example: 'https://geodatacube.example/stac/custom-extemsion/v1.0.0/schema.json'
- title: Reference to a core extension (STAC < 1.0.0-rc.1 only)
type: string
example: datacube
stac_license:
type: string
description: |-
License(s) of the data as a SPDX [License identifier](https://spdx.org/licenses/).
Alternatively, use `proprietary` if the license is not on the SPDX
license list or `various` if multiple licenses apply. In these two cases
links to the license texts SHOULD be added, see the `license` link
relation type.
Non-SPDX licenses SHOULD add a link to the license text with the
`license` relation in the links section. The license text MUST NOT be
provided as a value of this field. If there is no public license URL
available, it is RECOMMENDED to host the license text and link to it.
example: Apache-2.0
stac_providers:
type: array
description: >-
A list of providers, which MAY include all organizations capturing or
processing the data or the hosting provider. Providers SHOULD be listed
in chronological order with the most recent provider being the last
element of the list.
items:
type: object
title: Provider
required:
- name
properties:
name:
description: The name of the organization or the individual.
type: string
example: Example Cloud Corp.
description:
description: >-
Multi-line description to add further provider information such as
processing details for processors and producers, hosting details
for hosts or basic contact information.
CommonMark 0.29 syntax MAY be used for rich text representation.
type: string
example: No further processing applied.
roles:
description: |-
Roles of the provider.
The provider's role(s) can be one or more of the following
elements:
* `licensor`: The organization that is licensing the dataset under
the license specified in the collection's license field.
* `producer`: The producer of the data is the provider that
initially captured and processed the source data, e.g., ESA for
Sentinel-2 data.
* `processor`: A processor is any provider who processed data to a
derived product.
* `host`: The host is the actual provider offering the data on their
storage. There SHOULD be no more than one host, specified as last
element of the list.
type: array
items:
type: string
enum:
- producer
- licensor
- processor
- host
example:
- producer
- licensor
- host
url:
description: >-
Homepage on which the provider describes the dataset and publishes
contact information.
type: string
format: uri
example: https://cloud.example
stac_assets:
type: object
title: Assets
description: |-
Dictionary of asset objects for data that can be downloaded, each with a
unique key. The keys MAY be used by clients as file names.
additionalProperties:
$ref: '#/components/schemas/asset'
example:
preview.png:
href: 'https://geodatacube.example/api/v1/download/583fba8b2ce583fba8b2ce/preview.png'
type: image/png
title: Thumbnail
roles:
- thumbnail
process.json:
href: 'https://geodatacube.example/api/v1/download/583fba8b2ce583fba8b2ce/process.json'
type: application/json
title: Original Process
roles:
- process
- reproduction
1.tif:
href: 'https://geodatacube.example/api/v1/download/583fba8b2ce583fba8b2ce/1.tif'
type: image/tiff; application=geotiff
title: Band 1
roles:
- data
2.tif:
href: 'https://geodatacube.example/api/v1/download/583fba8b2ce583fba8b2ce/2.tif'
type: image/tiff; application=geotiff
title: Band 2
roles:
- data
inspire.xml:
href: 'https://geodatacube.example/api/v1/download/583fba8b2ce583fba8b2ce/inspire.xml'
type: application/xml
title: INSPIRE metadata
description: INSPIRE compliant XML metadata
roles:
- metadata
collection_summary_stats:
type: object
title: Statistics / Range
description: >-
By default, only ranges with a minimum and a
maximum value can be specified. Ranges can be
specified for ordinal values only, which means
ranges need to have a rank order. Therefore,
ranges can only be specified for numbers and
some special types of strings. Examples: grades
(A to F), dates, or times. Implementors are free
to add other derived statistical values to the
object, for example `mean` or `stddev`.
required:
- minimum
- maximum
properties:
minimum:
description: The minimum value (inclusive).
anyOf:
- type: string
- type: number
maximum:
description: The maximum value (inclusive).
anyOf:
- type: string
- type: number
bbox:
description: |-
Each bounding box is provided as four or six numbers,
depending on whether the coordinate reference system
includes a vertical axis (height or depth):
* West (lower left corner, coordinate axis 1)
* South (lower left corner, coordinate axis 2)
* Base (optional, minimum value, coordinate axis 3)
* East (upper right corner, coordinate axis 1)
* North (upper right corner, coordinate axis 2)
* Height (optional, maximum value, coordinate axis 3)
The coordinate reference system of the values is WGS 84
longitude/latitude (http://www.opengis.net/def/crs/OGC/1.3/CRS84).
For WGS 84 longitude/latitude the values are in most cases
the sequence of minimum longitude, minimum latitude, maximum
longitude, and maximum latitude.
However, in cases where the box spans the antimeridian the
first value (west-most box edge) is larger than the third value
(east-most box edge).
If the vertical axis is included, the third and the sixth
number are the bottom and the top of the 3-dimensional bounding box.
type: array
oneOf:
- title: 4 elements
minItems: 4
maxItems: 4
- title: 6 elements
minItems: 6
maxItems: 6
items:
type: number
example:
- -180
- -90
- 180
- 90
collection_id:
type: string
description: >-
A unique identifier for the collection, which MUST match the specified
pattern.
pattern: '^[\w\-\.~\/]+$'
example: Sentinel-2A
dimension:
title: Dimension
description: A dimension, each object represents a distinct dimension with the key being the dimension name.
type: object
required:
- type
properties:
type:
description: Type of the dimension.
type: string
enum:
- spatial
- temporal
- bands
- geometry
- other
description:
$ref: '#/components/schemas/description'
discriminator:
propertyName: type
mapping:
spatial: '#/components/schemas/dimension_spatial'
temporal: '#/components/schemas/dimension_temporal'
bands: '#/components/schemas/dimension_bands'
geometry: '#/components/schemas/dimension_geometry'
other: '#/components/schemas/dimension_other'
dimension_other:
allOf:
- $ref: '#/components/schemas/dimension'
- title: Additional Dimension
type: object
oneOf:
- title: Additional Dimension with Extent
required:
- extent
- title: Additional Dimension with Values
required:
- values
properties:
extent:
$ref: '#/components/schemas/collection_dimension_extent_open'
values:
$ref: '#/components/schemas/collection_dimension_values'
step:
$ref: '#/components/schemas/collection_dimension_step'
unit:
$ref: '#/components/schemas/collection_dimension_unit'
reference_system:
description: The reference system for the dimension.
type: string
dimension_geometry:
allOf:
- $ref: '#/components/schemas/dimension'
- title: Geometry Dimension
type: object
required:
- bbox
properties:
axes:
description: Axes of the vector dimension as an ordered set of `x`, `y` and `z`. Defaults to `x` and `y`.
default:
- 'x'
- 'y'
type: array
uniqueItems: true
items:
$ref: '#/components/schemas/dimension_axis_xyz'
bbox:
$ref: '#/components/schemas/bbox'
values:
description: Optionally, a representation of the vectors. This can be a list of WKT string or other free-form identifiers.
type: array
items:
type: string
geometry_types:
description: A set of all geometry types included in this dimension. If not present, mixed geometry types must be assumed.
type: array
uniqueItems: true
items:
$ref: '#/components/schemas/geometry_type'
reference_system:
$ref: '#/components/schemas/collection_dimension_srs'
dimension_bands:
allOf:
- $ref: '#/components/schemas/dimension'
- title: Band Dimension
description: |-
A dimension for the bands.
The band dimension only specifies the band names
as dimension labels. Further information to the
bands are available in either `sar:bands` or
`eo:bands` in the `summaries` property.
type: object
required:
- values
properties:
values:
$ref: '#/components/schemas/collection_dimension_values'
dimension_spatial:
allOf:
- $ref: '#/components/schemas/dimension'
- title: Spatial Dimension
description: A spatial (raster) dimension in one of the horizontal (x or y) or vertical (z) directions.
type: object
required:
- axis
properties:
axis:
$ref: '#/components/schemas/dimension_axis_xyz'
extent:
description: >-
Extent (lower and upper bounds) of the
dimension as two-dimensional array. Open
intervals with `null` are not allowed.
type: array
minItems: 2
maxItems: 2
items:
type: number
values:
description: 'A set of all potential values.'
type: array
minItems: 1
items:
type: number
step:
$ref: '#/components/schemas/collection_dimension_step'
reference_system:
$ref: '#/components/schemas/collection_dimension_srs'
discriminator:
propertyName: axis
mapping:
x: '#/components/schemas/dimension_spatial_horizontal'
y: '#/components/schemas/dimension_spatial_horizontal'
z: '#/components/schemas/dimension_spatial_vertical'
dimension_axis_xyz:
title: Axis
description: Axis of a geometry or dimension (`x`, `y` or `z`)
type: string
enum:
- 'x'
- 'y'
- 'z'
dimension_spatial_horizontal:
allOf:
- $ref: '#/components/schemas/dimension_spatial'
- title: Horizontal Spatial Dimension
required:
- extent
dimension_spatial_vertical:
allOf:
- $ref: '#/components/schemas/dimension_spatial'
- title: Vertical Spatial Dimension
anyOf:
- title: Vertical Spatial Dimension with Extent
required:
- extent
- title: Vertical Spatial Dimension with Values
required:
- values
dimension_temporal:
allOf:
- $ref: '#/components/schemas/dimension'
- title: Temporal Dimension
description: >-
A temporal dimension based on the ISO 8601
standard. The temporal reference system for the
data is expected to be ISO 8601 compliant
(Gregorian calendar / UTC). Data not compliant
with ISO 8601 can be represented as an
*Additional Dimension Object* with `type` set to
`temporal`.
type: object
required:
- extent
properties:
values:
description: >-
If the dimension consists of set of specific
values they can be listed here. The dates
and/or times MUST be strings compliant to
[ISO
8601](https://en.wikipedia.org/wiki/ISO_8601).
type: array
minItems: 1
items:
type: string
extent:
description: >-
Extent (lower and upper bounds) of the
dimension as two-dimensional array. The
dates and/or times MUST be strings compliant
to [ISO
8601](https://en.wikipedia.org/wiki/ISO_8601).
`null` is allowed for open date ranges.
type: array
minItems: 2
maxItems: 2
items:
type: string
nullable: true
step:
description: >-
The space between the temporal instances as
[ISO 8601
duration](https://en.wikipedia.org/wiki/ISO_8601#Durations),
e.g., `P1D`. Use `null` for irregularly
spaced steps.
type: string
nullable: true
collection_dimension_srs:
title: Spatial reference system
description: >-
The spatial reference system for the data, specified as [EPSG code](http://www.epsg-registry.org/), [WKT2 (ISO 19162) string](http://docs.opengeospatial.org/is/18-010r7/18-010r7.html), [PROJJSON object](https://proj.org/specifications/projjson.html) or [PROJ definition (deprecated)](https://proj.org/usage/quickstart.html). Defaults to EPSG code 4326.
default: 4326
oneOf:
- type: number
title: EPSG code
- type: string
title: WKT2 or PROJ definition (deprecated)
- type: object
title: PROJJSON
collection_dimension_extent_open:
description: >-
If the dimension consists of
[ordinal](https://en.wikipedia.org/wiki/Level_of_measurement#Ordinal_scale)
values, the extent (lower and upper bounds) of the values as
two-dimensional array. Use `null` for open intervals.
type: array
minItems: 2
maxItems: 2
items:
type: number
nullable: true
collection_dimension_values:
description: >-
A set of all potential values, especially useful for
[nominal](https://en.wikipedia.org/wiki/Level_of_measurement#Nominal_level)
values.
**Important:** The order of the values MUST be exactly how the dimension
values are also ordered in the data (cube). If the values specify band
names, the values MUST be in the same order as they are in the
corresponding band fields (i.e., `eo:bands` or `sar:bands`).
type: array
minItems: 1
items:
oneOf:
- type: number
- type: string
collection_dimension_step:
description: >-
If the dimension consists of
[interval](https://en.wikipedia.org/wiki/Level_of_measurement#Interval_scale)
values, the space between the values. Use `null` for irregularly spaced
steps.
type: number
nullable: true
collection_dimension_unit:
description: >-
The unit of measurement for the data, preferably compliant to [UDUNITS-2](https://ncics.org/portfolio/other-resources/udunits2/) units (singular).
type: string
process_arguments:
title: Process Arguments
type: object
additionalProperties:
$ref: '#/components/schemas/process_argument_value'
process_argument_value:
title: Process Argument Value
description: Arguments for a process. See the API documentation for more information.
nullable: true
anyOf:
- type: object
nullable: true
title: Object (restricted)
properties:
from_parameter:
not: {}
from_node:
not: {}
process_graph:
not: {}
- type: string
title: String
- type: number
title: Number (incl. integers)
- type: boolean
title: Boolean
- type: array
title: Array
items:
$ref: '#/components/schemas/process_argument_value'
- $ref: '#/components/schemas/process_graph_with_metadata'
- type: object
title: Result Reference
description: Data that is expected to be passed from another process.
required:
- from_node
properties:
from_node:
description: The ID of the node that data is expected to come from.
type: string
additionalProperties: false
- type: object
title: Parameter Reference
description: >-
A parameter for a process graph. Data that is expected to be passed to a process graph either from the user directly
or from the process that is executing the process graph.
required:
- from_parameter
properties:
from_parameter:
description: The name of the parameter that data is expected to come from.
type: string
additionalProperties: false
process_graph:
title: Process Graph
description: >-
A process graph defines a graph-like structure as a connected set of
executable processes. Each key is a unique identifier (node ID) that is
used to refer to the process in the graph.
type: object
additionalProperties:
x-additionalPropertiesName: Node ID
title: Process Node
type: object
required:
- process_id
- arguments
properties:
process_id:
$ref: '#/components/schemas/process_id'
namespace:
$ref: '#/components/schemas/process_namespace'
result:
type: boolean
description: >-
Used to specify which node is the last in the chain and returns
the result to return to the requesting context. This flag MUST
only be set once in each list of process nodes.
default: false
description:
description: Optional description about the process and its arguments.
type: string
nullable: true
arguments:
$ref: '#/components/schemas/process_arguments'
example:
dc:
process_id: load_collection
arguments:
id: Sentinel-2
spatial_extent:
west: 16.1
east: 16.6
north: 48.6
south: 47.2
temporal_extent:
- '2018-01-01'
- '2018-02-01'
bands:
process_id: filter_bands
description: >-
Filter and order the bands. The order is important for the following
reduce operation.
arguments:
data:
from_node: dc
bands:
- B08
- B04
- B02
evi:
process_id: reduce
description: >-
Compute the EVI. Formula: 2.5 * (NIR - RED) / (1 + NIR + 6*RED +
-7.5*BLUE)
arguments:
data:
from_node: bands
dimension: bands
reducer:
process_graph:
nir:
process_id: array_element
arguments:
data:
from_parameter: data
index: 0
red:
process_id: array_element
arguments:
data:
from_parameter: data
index: 1
blue:
process_id: array_element
arguments:
data:
from_parameter: data
index: 2
sub:
process_id: subtract
arguments:
data:
- from_node: nir
- from_node: red
p1:
process_id: product
arguments:
data:
- 6
- from_node: red
p2:
process_id: product
arguments:
data:
- -7.5
- from_node: blue
sum:
process_id: sum
arguments:
data:
- 1
- from_node: nir
- from_node: p1
- from_node: p2
div:
process_id: divide
arguments:
data:
- from_node: sub
- from_node: sum
p3:
process_id: product
arguments:
data:
- 2.5
- from_node: div
result: true
mintime:
process_id: reduce
description: Compute a minimum time composite by reducing the temporal dimension
arguments:
data:
from_node: evi
dimension: temporal
reducer:
process_graph:
min:
process_id: min
arguments:
data:
from_parameter: data
result: true
save:
process_id: save_result
arguments:
data:
from_node: mintime
format: GTiff
result: true
process:
title: Process
type: object
properties:
id:
$ref: '#/components/schemas/process_id'
summary:
$ref: '#/components/schemas/process_summary'
description:
$ref: '#/components/schemas/process_description'
categories:
$ref: '#/components/schemas/process_categories'
parameters:
$ref: '#/components/schemas/process_parameters'
returns:
$ref: '#/components/schemas/process_return_value'
deprecated:
$ref: '#/components/schemas/deprecated'
experimental:
$ref: '#/components/schemas/experimental'
exceptions:
$ref: '#/components/schemas/process_exceptions'
examples:
type: array
description: Examples, may be used for unit tests.
items:
title: Process Example
type: object
required:
- arguments
properties:
title:
type: string
description: A title for the example.
description:
$ref: '#/components/schemas/process_description'
arguments:
$ref: '#/components/schemas/process_arguments'
returns:
description: The return value which can by of any data type.
links:
type: array
description: |-
Links related to this process, e.g., additional external documentation.
It is RECOMMENDED to provide links with the following `rel` (relation) types.
1. `latest-version`: If a process has been marked as deprecated, a link SHOULD
point to the preferred version of the process. The relation types `predecessor-version`
(link to older version) and `successor-version` (link to newer version) can also be used
to show the relation between versions.
2. `example`: Links to examples of other processes that use this process.
3. `cite-as`: For all DOIs associated with the process, the respective DOI
links SHOULD be added.
For additional relation types see also the lists of
[common relation types](#section/API-Principles/Web-Linking).
items:
$ref: '#/components/schemas/link'
process_graph:
$ref: '#/components/schemas/process_graph'
user_defined_process_meta:
title: User-defined Process Metadata
description: A user-defined process, may only contain metadata and no process graph.
type: object
required:
- id
properties:
summary:
type: string
nullable: true
description:
type: string
nullable: true
parameters:
type: array
nullable: true
returns:
type: object
nullable: true
allOf:
- $ref: '#/components/schemas/process'
process_graph_with_metadata:
title: Process Graph with metadata
description: A process graph, optionally enriched with process metadata.
type: object
required:
- process_graph
properties:
id:
type: string
nullable: true
summary:
type: string
nullable: true
description:
type: string
nullable: true
parameters:
type: array
nullable: true
returns:
type: object
nullable: true
allOf:
- $ref: '#/components/schemas/process'
process_namespace:
type: string
nullable: true
default: null
example: null
description: |-
The namespace the `process_id` is valid for.
The following options are predefined by the geodatacube API, but additional
namespaces may be introduced by back-ends or in a future version of the API.
* `null` (default): Checks both user-defined and predefined processes,
but prefers user-defined processes if both are available.
This allows users to add missing predefined processes for portability,
e.g., common processes from [processes.openeo.org](https://processes.openeo.org)
that have a process graph included.
It is RECOMMENDED to log the namespace selected by the back-end for debugging purposes.
* `backend`: Uses exclusively the predefined processes listed at `GET /processes`.
* `user`: Uses exclusively the user-defined processes listed at `GET /process_graphs`.
If multiple processes with the same identifier exist, Clients SHOULD
inform the user that it's recommended to select a namespace.
process_id:
type: string
description: |-
The identifier for the process. It MUST be unique across its namespace
(e.g., predefined processes or user-defined processes).
Clients SHOULD warn the user if a user-defined process is added with the
same identifier as one of the predefined process.
pattern: '^\w+$'
example: ndvi
process_summary:
type: string
description: A short summary of what the process does.
process_categories:
type: array
description: A list of categories.
items:
type: string
description: Name of the category.
process_return_value:
type: object
title: Process Return Value
description: Description of the data that is returned by this process.
required:
- schema
properties:
description:
$ref: '#/components/schemas/process_description'
schema:
$ref: '#/components/schemas/process_schema'
experimental:
type: boolean
description: >-
Declares that the specified entity is experimental, which means that
it is likely to change or may produce unpredictable behaviour. Users
should refrain from using it in production, but still feel encouraged
to try it out and give feedback.
default: false
deprecated:
type: boolean
description: |-
Declares that the specified entity is deprecated with the potential
to be removed in any of the next versions. It should be transitioned out
of usage as soon as possible and users should refrain from using it in
new implementations.
default: false
process_exceptions:
type: object
title: Process Exceptions
description: |-
Declares exceptions (errors) that might occur during execution
of this process. This list is just for informative purposes and may be
incomplete. This list MUST only contain exceptions that stop the
execution of a process and MUST NOT contain warnings, notices or
debugging messages. It is meant to primarily contain errors that
have been caused by the user. It is RECOMMENDED that exceptions
are referred to and explained in process or parameter descriptions.
The keys define the error code and MUST match the following pattern:
`^\w+$`.
additionalProperties:
x-additionalPropertiesName: Error Code
title: Process Exception
type: object
required:
- message
properties:
description:
type: string
format: commonmark
description: |-
Detailed description to explain the error to client
users and back-end developers. This should not be shown in the
clients directly, but MAY be linked to in the errors `url`
property.
[CommonMark 0.29](http://commonmark.org/) syntax MAY be used
for rich text representation.
message:
type: string
description: >-
Explains the reason the server is rejecting the request. This
message is intended to be displayed to the client user. For
"4xx" error codes the message SHOULD explain shortly how the
client needs to modify the request.
The message MAY contain variables, which are enclosed by curly
brackets. Example: `{variable_name}`
example: >-
The value specified for the process argument '{argument}' in
process '{process}' is invalid: {reason}
http:
type: integer
description: >-
HTTP Status Code, following the [error handling conventions in
this API](#section/API-Principles/Error-Handling).
Defaults to `400`.
default: 400
process_parameters:
type: array
description: |-
A list of parameters.
The order in the array corresponds to the parameter order to
be used in clients that don't support named parameters.
**Note:** Specifying an empty array is different from (if allowed)
`null` or the property being absent.
An empty array means the process has no parameters.
`null` / property absent means that the parameters are unknown as
the user has not specified them. There could still be parameters in the
process graph, if one is specified.
items:
$ref: '#/components/schemas/process_parameter'
base_parameter:
type: object
required:
- name
- description
properties:
name:
type: string
description: |-
A unique name for the parameter.
It is RECOMMENDED to use [snake case](https://en.wikipedia.org/wiki/Snake_case) (e.g., `window_size` or `scale_factor`).
pattern: '^\w+$'
description:
$ref: '#/components/schemas/process_description'
optional:
type: boolean
description: >-
Determines whether this parameter is optional to be specified even when no default is specified.
Clients SHOULD automatically set this parameter to `true`, if a default value is specified.
Back-ends SHOULD NOT fail, if a default value is specified and this flag is missing.
default: false
deprecated:
$ref: '#/components/schemas/deprecated'
experimental:
$ref: '#/components/schemas/experimental'
default:
description: >-
The default value for this parameter.
Required parameters SHOULD NOT specify a default value. Optional parameters SHOULD always specify a default value.
parameter:
title: Parameter
type: object
required:
- schema
properties:
schema:
$ref: '#/components/schemas/data_type_schema'
allOf:
- $ref: '#/components/schemas/base_parameter'
process_parameter:
title: Process Parameter
type: object
required:
- schema
properties:
schema:
$ref: '#/components/schemas/process_schema'
allOf:
- $ref: '#/components/schemas/base_parameter'
batch_job:
title: Batch Job
description: >-
The metadata of a batch jobs that has been submitted by the
authenticated user.
type: object
required:
- id
- status
- created
properties:
id:
$ref: '#/components/schemas/job_id'
title:
$ref: '#/components/schemas/eo_title'
description:
$ref: '#/components/schemas/eo_description'
process:
$ref: '#/components/schemas/process_graph_with_metadata'
status:
type: string
enum:
- created
- queued
- running
- canceled
- finished
- error
description: |-
The current status of a batch job.
The following status changes can occur:
* `POST /jobs`: The status is initialized as `created`.
* `POST /jobs/{job_id}/results`: The status is set to `queued`, if
processing doesn't start instantly.
* Once the processing starts the status is set to `running`.
* Once the data is available to download the status is set to `finished`.
* Whenever an error occurs during processing, the status MUST be set to `error`.
* `DELETE /jobs/{job_id}/results`: The status is set to `canceled` if
the status was `running` beforehand and partial or preliminary results
are available to be downloaded. Otherwise the status is set to
`created`.
example: running
default: created
progress:
type: number
description: >-
Indicates the process of a running batch job in percent.
Can also be set for a job which stopped due to an error or was
canceled by the user. In this case, the value indicates
the progress at which the job stopped. The Property may not be
available for the status codes `created` and `queued`.
Submitted and queued jobs only allow the value `0`,
finished jobs only allow the value `100`.
minimum: 0
maximum: 100
example: 75.5
created:
$ref: '#/components/schemas/created'
updated:
$ref: '#/components/schemas/updated'
usage:
description: |-
Metrics about the resource usage of the batch job.
Back-ends are not expected to update the metrics while processing data,
so the metrics can only be available after the job has finished
or has stopped due to an error.
For usage metrics during processing, metrics can better be added to the
logs (e.g., `GET /jobs/{job_id}/logs`) with the same schema.
allOf:
- $ref: '#/components/schemas/usage'
log_level:
$ref: '#/components/schemas/min_log_level_default'
links:
type: array
description: |-
Links related to this batch job, e.g., a links to
invoices, log files or results.
It is RECOMMENDED to provide links with the following `rel` (relation) types.
1. `monitor`: If logs are available, a link to the [logs endpoint](#tag/Batch-Jobs/operation/debug-job).
2. `result`: If batch job results are available, a link to the [results endpoint](#tag/Batch-Jobs/operation/list-results).
The relation types `monitor` and `result` may occur for various batch job states:
1. `created`: When the batch job was executed before and has been reset to `created` after an
[update](#tag/Batch-Jobs/operation/update-job) there could still be results and logs available
until they get discarded by [queueing the batch job again](#tag/Batch-Jobs/operation/start-job);
2. `finished`: The full log and results are expected to be available; and
3. `error` / `canceled`: Partial results and logs may be available.
For more relation types see the lists of
[common relation types](#section/API-Principles/Web-Linking).
items:
$ref: '#/components/schemas/link'
example:
- rel: result
type: application/json
title: Batch Job Results
href: https://geodatacube.example/api/v1/jobs/123/logs
- rel: result
type: application/json
title: Batch Job Logs
href: https://geodatacube.example/api/v1/jobs/123/logs
job_id:
type: string
description: >-
Per-backend unique identifier of the batch job, generated by the
back-end during creation. MUST match the specified pattern.
pattern: '^[\w\-\.~]+$'
example: a3cca2b2aa1e3b5b
created:
type: string
format: date-time
description: >-
Date and time of creation, formatted as a [RFC
3339](https://www.rfc-editor.org/rfc/rfc3339.html) date-time.
example: '2017-01-01T09:32:12Z'
updated:
type: string
format: date-time
description: >-
Date and time of the last status change, formatted as a [RFC
3339](https://www.rfc-editor.org/rfc/rfc3339.html) date-time.
example: '2017-01-01T09:36:18Z'
description:
type: string
format: commonmark
description: >-
Detailed description to explain the entity.
[CommonMark 0.29](http://commonmark.org/) syntax MAY be used for rich
text representation.
object_title:
type: string
description: >-
A human-readable short title to be displayed to users **in addition** to
the names specified in the keys. This property is only for better user
experience so that users can understand the names better.
Example titles could be `GeoTiff` for the key `GTiff` (for file formats)
or `OGC Web Map Service` for the key `WMS` (for service types).
The title MUST NOT be used in communication (e.g., in process graphs),
although clients MAY translate the titles into the corresponding names.
eo_title:
description: A short description to easily distinguish entities.
type: string
nullable: true
example: NDVI based on Sentinel 2
eo_description:
type: string
format: commonmark
description: >-
Detailed multi-line description to explain the entity.
[CommonMark 0.29](http://commonmark.org/) syntax MAY be used for rich
text representation.
nullable: true
example: Deriving minimum NDVI measurements over pixel time series of Sentinel 2
process_description:
type: string
format: commonmark
description: >-
Detailed description to explain the entity.
[CommonMark 0.29](http://commonmark.org/) syntax MAY be used for rich
text representation. In addition to the CommonMark syntax, clients can
convert process IDs that are formatted as in the following example into
links instead of code blocks: ``` ``process_id()`` ```
service:
title: Secondary Web Service
description: >-
The metadata of a secondary web service that has been submitted by the
authenticated user.
type: object
required:
- id
- enabled
- type
- url
properties:
id:
$ref: '#/components/schemas/service_id'
title:
$ref: '#/components/schemas/eo_title'
description:
$ref: '#/components/schemas/eo_description'
url:
type: string
format: uri
description: >-
URL at which the secondary web service is accessible. Doesn't
necessarily need to be located within the API.
example: 'https://geodatacube.example/wms/wms-a3cca9'
type:
$ref: '#/components/schemas/service_type'
enabled:
$ref: '#/components/schemas/service_enabled'
process:
$ref: '#/components/schemas/process_graph_with_metadata'
configuration:
$ref: '#/components/schemas/service_configuration'
attributes:
title: Secondary Web Service Attributes
type: object
description: >-
Additional attributes of the secondary web service, e.g.,
available layers for a WMS based on the bands in the
underlying GeoTiff.
example:
layers:
- ndvi
- evi
created:
$ref: '#/components/schemas/created'
usage:
description: |-
Metrics about the resource usage of the secondary web service.
Back-ends are not expected to update the metrics in real-time.
For detailed usage metrics for individual processing steps, metrics
can be added to the logs (e.g., `GET /jobs/{job_id}/logs`) with the
same schema.
allOf:
- $ref: '#/components/schemas/usage'
log_level:
$ref: '#/components/schemas/min_log_level_default'
service_type:
description: >-
Definition of the service type to access result data. All available
service types can be retrieved via `GET /service_types`. Service types
MUST be accepted in a *case insensitive* manner.
type: string
example: wms
service_configuration:
type: object
title: Service Configuration
description: >-
Map of configuration settings, i.e., the setting names supported by the secondary
web service combined with actual values. See `GET /service_types` for
supported configuration settings. For example, this could
specify the required version of the service, visualization details or
any other service dependant configuration.
example:
version: 1.3.0
service_enabled:
type: boolean
description: >-
Describes whether a secondary web service is responding to requests
(true) or not (false). Disabled services don't produce any costs.
service_id:
type: string
description: >-
A per-backend unique identifier of the secondary web service, generated
by the back-end during creation. MUST match the specified pattern.
pattern: '^[\w\-\.~]+$'
example: wms-a3cca9
resource_parameter:
x-additionalPropertiesName: Parameter Name
type: object
title: Resource Parameter
description: |-
Describes a parameter for various resources (e.g., file formats, service types).
The parameters are specified according to the [JSON Schema draft-07](http://json-schema.org/) specification.
See the chapter ['Schemas' in 'Defining Processes'](#section/Processes/Defining-Processes) for more information.
The following more complex JSON Schema keywords SHOULD NOT be used:
`if`, `then`, `else`, `readOnly`, `writeOnly`, `dependencies`, `minProperties`, `maxProperties`, `patternProperties`.
JSON Schemas SHOULD always be dereferenced (i.e, all `$refs` should be resolved). This allows clients to consume the schemas much better.
Clients are not expected to support dereferencing `$refs`.
Note: The specified schema is only a common subset of JSON Schema. Additional keywords MAY be used.
required:
- description
properties:
description:
type: string
description: A brief description of the parameter according to [JSON Schema draft-07](https://json-schema.org/draft-07/json-schema-validation.html#rfc.section.10.1).
required:
type: boolean
description: Determines whether this parameter is mandatory.
default: false
experimental:
$ref: '#/components/schemas/experimental'
default:
description: >-
The default value represents what would be assumed by the consumer
of the input as the value of the parameter if none is provided. The
value MUST conform to the defined type for the parameter defined at
the same level. For example, if type is string, then default can be
"foo" but cannot be 1. See [JSON Schema draft-07](https://json-schema.org/draft-07/json-schema-validation.html#rfc.section.10.2).
allOf:
- $ref: '#/components/schemas/process_json_schema'
error:
title: General Error
description: >-
An error object declares additional information about a client-side or
server-side error.
See also:
* [Error Handling](#section/API-Principles/Error-Handling) in the API in general.
type: object
required:
- code
- message
properties:
id:
type: string
description: >-
A back-end MAY add a unique identifier to the error response to be able
to log and track errors with further non-disclosable details. A client
could communicate this identifier to a back-end provider to get further
information.
example: 550e8400-e29b-11d4-a716-446655440000
code:
$ref: '#/components/schemas/log_code'
message:
type: string
description: >-
A message explaining what the client may need to change or what
difficulties the server is facing.
example: Parameter 'sample' is missing.
links:
$ref: '#/components/schemas/log_links'
log_code:
type: string
description: >-
The code is either one of the standardized error codes or a custom code,
for example specified by a user in the `inspect` process.
example: SampleError
log_links:
description: |-
Links related to this log entry / error, e.g., to a resource that
provides further explanations.
For relation types see the lists of
[common relation types](#section/API-Principles/Web-Linking).
type: array
items:
$ref: '#/components/schemas/link'
example:
- href: 'https://geodatacube.example/docs/errors/SampleError'
rel: about
log_level:
description: |-
The severity level of the log entry.
The order of the levels is as follows (from low to high severity): `debug`, `info`, `warning`, `error`.
The level `error` usually corresponds with critical issues that usually terminate the data processing.
type: string
enum:
- error
- warning
- info
- debug
example: error
min_log_level_default:
description: |-
The minimum severity level for log entries that the back-end stores for the processing request.
The order of the levels is as follows (from low to high severity): `debug`, `info`, `warning`, `error`.
That means if `warning` is set, the back-end will only store log entries with the level `warning` and `error`.
The default minimum log level is `info`. Users need to specifically set this property to `debug` to get *all* log entries.
It is RECOMMENDED that users set the level at least to "warning" in production workflows.
type: string
enum:
- error
- warning
- info
- debug
default: info
example: warning
min_log_level_update:
description: |-
Updates the minimum severity level for log entries that the back-end stores for the processing requests.
The back-end doesn't need to update existing log entries.
type: string
enum:
- error
- warning
- info
- debug
example: warning
data_type_schema:
title: Data Types
description: Either a single data type or a list of data types.
oneOf:
- $ref: '#/components/schemas/process_json_schema'
- title: Multiple data types
description: A list of data types this parameter supports, specified as JSON Schemas.
type: array
minItems: 1
uniqueItems: true
items:
$ref: '#/components/schemas/process_json_schema'
process_schema:
title: Process Data types
description: Either a single data type or a list of data types for process parameter or process return values.
oneOf:
- $ref: '#/components/schemas/process_json_schema'
- title: Multiple data types
description: A list of data types supported, specified as JSON Schemas.
type: array
minItems: 1
uniqueItems: true
items:
$ref: '#/components/schemas/process_json_schema'
process_json_schema:
type: object
title: Single Data Type
description: |-
Specifies a data type supported by a parameter or return value.
The data types are specified according to the [JSON Schema draft-07](http://json-schema.org/) specification.
See the chapter ['Schemas' in 'Defining Processes'](#section/Processes/Defining-Processes) for more information.
JSON Schemas SHOULD NOT contain `default`, `anyOf`, `oneOf`, `allOf`, or `not` at the top-level of the schema.
Instead specify each data type in a separate array element.
The following more complex JSON Schema keywords SHOULD NOT be used:
`if`, `then`, `else`, `readOnly`, `writeOnly`, `dependencies`, `minProperties`, `maxProperties`, `patternProperties`.
JSON Schemas SHOULD always be dereferenced (i.e., all `$refs` should be resolved). This allows clients to consume the schemas much better.
Clients are not expected to support dereferencing `$refs`.
Note: The specified schema is only a common subset of JSON Schema. Additional keywords MAY be used.
properties:
subtype:
type: string
description: The allowed sub data type for a value. See the chapter on [subtypes](#section/Processes/Defining-Processes) for more information.
deprecated:
$ref: '#/components/schemas/deprecated'
allOf:
- $ref: '#/components/schemas/json_schema'
oneOf:
- title: Generic
- $ref: '#/components/schemas/process_graph_json_schema'
- $ref: '#/components/schemas/datacube_json_schema'
process_graph_json_schema:
title: Process Graph
type: object
properties:
subtype:
type: string
enum:
- process-graph
parameters:
type: array
title: Process Graph Parameters
description: |-
A list of parameters passed to the child process graph.
The order in the array corresponds to the parameter order to
be used in clients that don't support named parameters.
items:
$ref: '#/components/schemas/parameter'
returns:
type: object
title: Process Graph Return Value
description: |-
Description of the data that is returned by the child process graph.
required:
- schema
properties:
description:
$ref: '#/components/schemas/process_description'
schema:
$ref: '#/components/schemas/data_type_schema'
allOf:
- $ref: '#/components/schemas/process_json_schema'
datacube_json_schema:
title: Datacube
properties:
subtype:
type: string
enum:
- datacube
dimensions:
title: Datacube constraints
description: |-
Allows to specify requirements the data cube has to fulfill.
As of now, it only allows specifying the dimension types and
adds for specific dimension types:
* axes for `spatial` dimensions in raster datacubes; and
* geometry types for `geometry` dimensions in vector datacubes.
type: array
items:
type: object
required:
- type
oneOf:
- title: Spatial (raster)
properties:
type:
type: string
enum:
- spatial
axis:
type: array
minItems: 1
items:
$ref: '#/components/schemas/dimension_axis_xyz'
- title: Spatial (vector)
properties:
type:
type: string
enum:
- geometry
geometry_type:
type: array
minItems: 1
items:
$ref: '#/components/schemas/geometry_type'
- title: Other
properties:
type:
type: string
enum:
- bands
- temporal
- other
json_schema:
type: object
title: JSON Schema
description: |-
A JSON Schema compliant to [JSON Schema draft-07](https://json-schema.org/draft-07/json-schema-validation.html) or later.
JSON Schemas SHOULD always be dereferenced (i.e., all `$refs` should be resolved).
This allows clients to consume the schemas much better.
Clients are not expected to support dereferencing `$refs`.
Note: The specified schema in the OpenAPI document is only a common subset of JSON Schema.
Additional keywords from the JSON Schema specification MAY be used.
properties:
$schema:
description: |-
The JSON Schema version. If not given in the context of this API,
defaults to `draft-07`.
The user may need to add the default value for `$schema` property explicitly to the JSON Schema
object before passing it to a JSON Schema validator.
type: string
format: uri
default: http://json-schema.org/draft-07/schema#
$id:
description: ID of your JSON Schema.
type: string
format: uri
type:
description: |-
The allowed basic data type(s) for a value.
If this property is not present, all data types are allowed.
oneOf:
- $ref: '#/components/schemas/json_schema_type'
- type: array
minItems: 1
uniqueItems: true
items:
$ref: '#/components/schemas/json_schema_type'
pattern:
type: "string"
format: "regex"
description: The regular expression a string value must match against.
enum:
type: array
items: {}
description: An exclusive list of allowed values.
minimum:
type: number
description: The minimum value (inclusive) allowed for a numerical value.
maximum:
type: number
description: The maximum value (inclusive) allowed for a numerical value.
minItems:
type: number
minimum: 0
default: 0
description: The minimum number of items required in an array.
maxItems:
type: number
minimum: 0
description: The maximum number of items required in an array.
items:
description: Specifies schemas for the items in an array.
anyOf:
- type: array
minItems: 1
items:
$ref: '#/components/schemas/json_schema'
- $ref: '#/components/schemas/json_schema'
additionalProperties:
description: >-
You can add any other property supported by the JSON Schema version that is given through the property `$schema`,
so either [draft-07](https://json-schema.org/draft-07/json-schema-validation.html) or any later version.
json_schema_type:
type: string
enum:
- array
- boolean
- integer
- 'null'
- number
- object
- string
geometry_type:
title: Geometry type
type: string
enum:
- Point
- MultiPoint
- LineString
- MultiLineString
- Polygon
- MultiPolygon
- GeometryCollection
GeoJsonPoint3D:
type: array
description: Point in 3D space
minItems: 2
maxItems: 3
items:
type: number
GeoJsonPoint:
type: object
title: GeoJSON Point
required:
- type
- coordinates
properties:
type:
type: string
enum:
- Point
coordinates:
$ref: '#/components/schemas/GeoJsonPoint3D'
GeoJsonFeatureCollection:
type: object
required:
- type
- features
properties:
type:
type: string
enum:
- FeatureCollection
features:
type: array
items:
$ref: '#/components/schemas/GeoJsonFeature'
GeoJsonFeature:
type: object
required:
- type
- geometry
- properties
properties:
type:
type: string
enum:
- Feature
geometry:
$ref: '#/components/schemas/GeoJsonGeometry'
properties:
type: object
nullable: true
GeoJsonGeometry:
title: GeoJSON Geometry
type: object
required:
- type
properties:
type:
$ref: '#/components/schemas/geometry_type'
discriminator:
propertyName: type
mapping:
Point: '#/components/schemas/GeoJsonPoint'
LineString: '#/components/schemas/GeoJsonLineString'
Polygon: '#/components/schemas/GeoJsonPolygon'
MultiPoint: '#/components/schemas/GeoJsonMultiPoint'
MultiLineString: '#/components/schemas/GeoJsonMultiLineString'
MultiPolygon: '#/components/schemas/GeoJsonMultiPolygon'
GeometryCollection: '#/components/schemas/GeoJsonGeometryCollection'
GeoJsonLineString:
allOf:
- $ref: '#/components/schemas/GeoJsonGeometry'
- type: object
title: GeoJSON LineString
required:
- coordinates
properties:
coordinates:
type: array
items:
$ref: '#/components/schemas/GeoJsonPoint3D'
GeoJsonPolygon:
allOf:
- $ref: '#/components/schemas/GeoJsonGeometry'
- type: object
title: GeoJSON Polygon
required:
- coordinates
properties:
coordinates:
type: array
items:
type: array
items:
$ref: '#/components/schemas/GeoJsonPoint3D'
GeoJsonMultiPoint:
allOf:
- $ref: '#/components/schemas/GeoJsonGeometry'
- type: object
title: GeoJSON MultiPoint
required:
- coordinates
properties:
coordinates:
type: array
items:
$ref: '#/components/schemas/GeoJsonPoint3D'
GeoJsonMultiLineString:
allOf:
- $ref: '#/components/schemas/GeoJsonGeometry'
- type: object
title: GeoJSON MultiLineString
required:
- coordinates
properties:
coordinates:
type: array
items:
type: array
items:
$ref: '#/components/schemas/GeoJsonPoint3D'
GeoJsonMultiPolygon:
allOf:
- $ref: '#/components/schemas/GeoJsonGeometry'
- type: object
title: GeoJSON MultiPolygon
required:
- coordinates
properties:
coordinates:
type: array
items:
type: array
items:
type: array
items:
$ref: '#/components/schemas/GeoJsonPoint3D'
GeoJsonGeometryCollection:
allOf:
- $ref: '#/components/schemas/GeoJsonGeometry'
- type: object
title: GeoJSON GeometryCollection
required:
- geometries
properties:
geometries:
type: array
items:
$ref: '#/components/schemas/GeoJsonGeometry'
log_entry:
title: Log Entry
description: >-
An log message that communicates information about the processed data.
type: object
required:
- id
- level
- message
properties:
id:
type: string
description: >-
An unique identifier for the log message, could simply be an incrementing number.
example: "1"
code:
$ref: '#/components/schemas/log_code'
level:
$ref: '#/components/schemas/log_level'
message:
type: string
description: >-
A concise message explaining the log entry.
Messages do *not* explicitly support [CommonMark 0.29](http://commonmark.org/)
syntax as other descriptive fields in the geodatacube API do,
but the messages MAY contain line breaks or indentation.
It is NOT RECOMMENDED to add stacktraces to the `message`.
example: >-
Can't load the UDF file from the URL `https://geodatacube.example/invalid/file.txt`.
Server responded with error 404.
time:
type: string
format: date-time
title: Date and Time
description: >-
The date and time the event happened, in UTC. Formatted as a
[RFC 3339](https://www.rfc-editor.org/rfc/rfc3339.html) date-time.
data:
description: |-
Data of any type. It is the back-ends task to decide how to best
present passed data to a user.
For example, a datacube passed to the `inspect` SHOULD return the
metadata similar to the collection metadata, including `cube:dimensions`.
There are implementation guidelines available for the `inspect` process.
path:
description: |-
Describes where the log entry originates from.
The first element of the array is the process that has triggered the log entry, the second element is the parent of the process that has triggered the log entry, etc. This pattern is followed until the root of the process graph.
type: array
items:
type: object
required:
- node_id
properties:
node_id:
type: string
description: The id of the node the log entry originates from.
example: runudf1
process_id:
$ref: '#/components/schemas/process_id'
namespace:
$ref: '#/components/schemas/process_namespace'
parameter:
type: string
description: >-
If applicable, the name of the parameter the log entry corresponds to.
pattern: '^\w+$'
nullable: true
example: udf
usage:
$ref: '#/components/schemas/usage'
links:
$ref: '#/components/schemas/log_links'
usage:
title: Resource usage metrics
type: object
properties:
cpu:
description: |-
Specifies the CPU usage, usually in a unit such as `cpu-seconds`.
allOf:
- $ref: '#/components/schemas/usage_metric'
memory:
description: |-
Specifies the memory usage, usually in a unit such as `mb-seconds` or `gb-hours`.
allOf:
- $ref: '#/components/schemas/usage_metric'
duration:
description: |-
Specifies the wall time, usually in a unit such as `seconds`, `minutes` or `hours`.
allOf:
- $ref: '#/components/schemas/usage_metric'
network:
description: |-
Specifies the network transfer usage (incoming and outgoing), usually in a unit such as `b` (bytes), `kb` (kilobytes), `mb` (megabytes) or `gb` (gigabytes).
allOf:
- $ref: '#/components/schemas/usage_metric'
disk:
description: |-
Specifies the amount of input (read) and output (write) operations on the storage such as disks, usually in a unit such as `b` (bytes), `kb` (kilobytes), `mb` (megabytes), or `gb` (gigabytes).
allOf:
- $ref: '#/components/schemas/usage_metric'
storage:
description: |-
Specifies the usage of storage space, usually in a unit such as `b` (bytes), `kb` (kilobytes), `mb` (megabytes), or `gb` (gigabytes).
allOf:
- $ref: '#/components/schemas/usage_metric'
additionalProperties:
description: |-
Additional metrics.
allOf:
- $ref: '#/components/schemas/usage_metric'
example:
cpu:
value: 40668
unit: cpu-seconds
duration:
value: 2611
unit: seconds
memory:
value: 108138811
unit: mb-seconds
network:
value: 0
unit: kb
storage:
value: 55
unit: mb
usage_metric:
type: object
required:
- value
- unit
properties:
value:
type: number
minimum: 0
unit:
type: string
responses:
logs:
description: Lists the requested log entries.
content:
application/json:
schema:
title: Log Entries
type: object
required:
- logs
- links
properties:
level:
description: |-
The minimum severity level for log entries that the back-end returns.
This property MUST reflect the effective lowest `level` that may appear in the document,
which is (if implemented) the highest level of:
1. the `log_level` specified by the user for the processing request.
2. the `level` specified by the user for the log request.
The order of the levels is as follows (from low to high severity): `debug`, `info`, `warning`, `error`.
That means if `warning` is set, the logs will only contain entries with the level `warning` and `error`.
type: string
enum:
- error
- warning
- info
- debug
default: debug
logs:
description: A chronological list of logs.
type: array
items:
$ref: '#/components/schemas/log_entry'
links:
$ref: '#/components/schemas/links_pagination'
client_error:
description: |-
The request can't be fulfilled due to an error on the client-side, i.e., the
request is invalid. The client SHOULD NOT repeat the request without
modifications.
The response body SHOULD contain a JSON error object.
MUST be any HTTP status code specified in [RFC
7231](https://www.rfc-editor.org/rfc/rfc7231.html#section-6.6). This request
usually does not respond with HTTP status codes 401 and 403 due to
missing authorization. HTTP status code 404 SHOULD be used if the value
of a path parameter is invalid.
See also:
* [Error Handling](#section/API-Principles/Error-Handling) in the API in general.
content:
application/json:
schema:
$ref: '#/components/schemas/error'
client_error_auth:
description: |-
The request can't be fulfilled due to an error on the client-side, i.e., the
request is invalid. The client SHOULD NOT repeat the request without
modifications.
The response body SHOULD contain a JSON error object.
MUST be any HTTP status code specified in [RFC 7231](https://www.rfc-editor.org/rfc/rfc7231.html#section-6.6).
This request MUST respond with HTTP status codes 401 if authorization is required or
403 if the authorization failed or access is forbidden in general to the
authenticated user. HTTP status code 404 SHOULD be used if the value of
a path parameter is invalid.
See also:
* [Error Handling](#section/API-Principles/Error-Handling) in the API in general.
content:
application/json:
schema:
$ref: '#/components/schemas/error'
server_error:
description: |-
The request can't be fulfilled due to an error at the back-end. The
error is never the client’s fault and therefore it is reasonable for the
client to retry the exact same request that triggered this response.
The response body SHOULD contain a JSON error object. MUST be any HTTP
status code specified in [RFC 7231](https://www.rfc-editor.org/rfc/rfc7231.html#section-6.6).
See also:
* [Error Handling](#section/API-Principles/Error-Handling) in the API in general.
content:
application/json:
schema:
$ref: '#/components/schemas/error'
parameters:
ogc_processID:
name: processID
description: ID of the OGC process
in: path
required: true
style: simple
explode: false
schema:
type: string
f-metadata:
name: f
in: query
description: The format of the response. If no value is provided, the accept
header is used to determine the format. Accepted values are 'json' or 'html'.
required: false
schema:
type: string
enum:
- json
- html
style: form
explode: false
subset:
name: subset
in: query
description: |
Retrieve only part of the data by slicing or trimming along one or more axis
For trimming: {axisAbbrev}({low}:{high}) (preserves dimensionality)
An asterisk (`*`) can be used instead of {low} or {high} to indicate the minimum/maximum value.
For slicing: {axisAbbrev}({value}) (reduces dimensionality)
style: form
explode: false
required: false
schema:
type: array
items:
type: string
crs:
name: crs
in: query
description: reproject the output to the given crs
required: false
style: form
explode: true
schema:
type: string
subset-crs:
name: subset-crs
in: query
description: crs for the specified subset
required: false
style: form
explode: true
schema:
type: string
bbox-crs:
name: bbox-crs
in: query
description: crs for the specified bbox
required: false
style: form
explode: true
schema:
type: string
scale-factor:
name: scale-factor
in: query
description: |-
For each axis, the returned coverage will contain the number of original
sampled values, divided by the scale-factor.
required: false
schema:
type: number
scale-axes:
name: scale-axes
in: query
description: |-
Returns a coverage re-scaled so as to contain `{number}` times less sample
values along the corresponding axisName axis, and all original values along
the dimensions of unspecified axes
```
ScalingSpec: "scale-axes"=axisName({number})[,axisName({number})]*
axisName: {NCName}
Where:
{number} is an integer or floating-point number, and {axisName} is the
same as one of the axisLabels defined in the DomainSet
```
required: false
schema:
type: string
scale-size:
name: scale-size
in: query
description: |-
When `scale-size` is used, the returned coverage will contain exactly the
specified number of sample values along each axis which is specified, and
the original number of sample values for unspecified axes.
```
ScalingSpec: "scale-size"=axisName({number})[,axisName({number})]*
axisName: {text}
Where:
{number} is an integer or floating-point number and {axisName}
is the same as one of the axisLabels defined in the DomainSet
```
required: false
schema:
type: string
properties:
name: properties
in: query
description: |-
Select specific data record fields (measured/observed properties) to be returned.
```
RangeSubsetSpec: "properties"=field[,fieldName]*
field: {fieldName}|{fieldIndex}|"*"
fieldName: {text}
fieldIndex: {number}
Where:
{number} is an integer number, and
{text} is some general ASCII text.
```
The field name must be one of the id defined in the RangeType DataRecord fields.
The field index must be an integer between 0 and the number of fields - 1 defined in the RangeType DataRecord fields.
An asterisk indicates to also include subsequent fields.
required: false
schema:
type: string
f-coverage:
name: f
description: The optional f parameter indicates the output format which the
server shall provide as part of the response document. It has preference over
the HTTP Accept header.
explode: false
in: query
required: false
schema:
type: string
enum:
- png
- geotiff
- netcdf
- json
- covjson
- html
style: form
f-rangeset:
name: f
description: The optional f parameter indicates the output format which the
server shall provide as part of the response document. It has preference over
the HTTP Accept header.
explode: false
in: query
required: false
schema:
default: json
enum:
- json
- html
type: string
style: form
f-domainset:
name: f
description: The optional f parameter indicates the output format which the
server shall provide as part of the response document. It has preference over
the HTTP Accept header.
explode: false
in: query
required: false
schema:
default: json
enum:
- json
- html
type: string
style: form
f-rangetype:
name: f
description: The optional f parameter indicates the output format which the
server shall provide as part of the response document. It has preference over
the HTTP Accept header.
explode: false
in: query
required: false
schema:
default: json
enum:
- json
- html
type: string
style: form
pagination_limit:
name: limit
description: |-
This parameter enables pagination for the endpoint and specifies the maximum number of
elements that arrays in the top-level object (e.g., collections, processes, batch jobs,
secondary services, log entries, etc.) are allowed to contain.
The `links` array MUST NOT be paginated like the resources,
but instead contain links related to the paginated resources
or the pagination itself (e.g., a link to the next page).
If the parameter is not provided or empty, all elements are returned.
Pagination is OPTIONAL: back-ends or clients may not support it.
Therefore it MUST be implemented in a way that clients not supporting
pagination get all resources regardless. Back-ends not supporting
pagination MUST return all resources.
If the response is paginated, the `links` array MUST be used to communicate the
links for browsing the pagination with predefined `rel` types. See the `links` array schema
for supported `rel` types.
Back-end implementations can, unless specified otherwise, use all kind of pagination techniques,
depending on what is supported best by the implementations' infrastructure: page-based, offset-based, token-based,
or something else. The clients SHOULD use whatever is specified
in the links with the corresponding `rel` types.
in: query
allowEmptyValue: true
example: 10
schema:
type: integer
minimum: 1
log_offset:
name: offset
description: The last identifier (property `id` of a log entry) the client has received. If provided, the back-ends only sends the entries that occurred after the specified identifier. If not provided or empty, start with the first entry.
in: query
allowEmptyValue: true
example: log1234
schema:
type: string
log_level:
name: level
description: |-
The minimum severity level for log entries that the back-end returns.
The order of the levels is as follows (from low to high severity): `debug`, `info`, `warning`, `error`.
If `warning` is set, the back-end will only return log entries with the level `warning` and `error`.
The default minimum log level is `debug`, which returns all log levels.
in: query
allowEmptyValue: true
example: error
schema:
type: string
enum:
- error
- warning
- info
- debug
default: info
service_id:
name: service_id
in: path
description: Identifier of the secondary web service.
required: true
schema:
$ref: '#/components/schemas/service_id'
job_id:
name: job_id
in: path
description: Identifier of the batch job.
required: true
schema:
$ref: '#/components/schemas/job_id'
collection_id:
name: collection_id
in: path
description: Collection identifier
required: true
schema:
$ref: '#/components/schemas/collection_id'
bbox:
name: bbox
in: query
description: |-
Only features that have a geometry that intersects the bounding box are selected.
The bounding box is provided as four or six numbers, depending on whether the
coordinate reference system includes a vertical axis (height or depth):
* Lower left corner, coordinate axis 1
* Lower left corner, coordinate axis 2
* Minimum value, coordinate axis 3 (optional)
* Upper right corner, coordinate axis 1
* Upper right corner, coordinate axis 2
* Maximum value, coordinate axis 3 (optional)
The coordinate reference system of the values is WGS 84 longitude/latitude
(http://www.opengis.net/def/crs/OGC/1.3/CRS84).
For WGS 84 longitude/latitude the values are, in most cases, the sequence of
minimum longitude, minimum latitude, maximum longitude, and maximum latitude.
However, in cases where the box spans the antimeridian the first value
(west-most box edge) is larger than the third value (east-most box edge).
If the vertical axis is included, the third and the sixth number are
the bottom and the top of the 3-dimensional bounding box.
If a feature has multiple spatial geometry properties, it is the decision of the
server whether only a single spatial geometry property is used to determine
the extent or all relevant geometries.
required: false
schema:
type: array
oneOf:
- minItems: 4
maxItems: 4
- minItems: 6
maxItems: 6
items:
type: number
style: form
explode: false
datetime:
name: datetime
in: query
description: |-
Either a date-time or an interval, open or closed. Date and time expressions
adhere to RFC 3339. Open intervals are expressed using double-dots.
Examples:
* A date-time: "2018-02-12T23:20:50Z"
* A closed interval: "2018-02-12T00:00:00Z/2018-03-18T12:31:12Z"
* Open intervals: "2018-02-12T00:00:00Z/.." or "../2018-03-18T12:31:12Z"
Only features that have a temporal property that intersects the value of
`datetime` are selected.
If a feature has multiple temporal properties, it is the decision of the
server whether only a single temporal property is used to determine
the extent or all relevant temporal properties.
required: false
schema:
type: string
style: form
explode: false
feature_id:
name: feature_id
in: path
description: local identifier of a feature
required: true
schema:
type: string
examples:
evi_user_defined_process:
description: A user-defined process that computes the EVI.
value:
id: evi
summary: Enhanced Vegetation Index
description: >-
Computes the Enhanced Vegetation Index (EVI).
It is computed with the following formula: `2.5 * (NIR - RED) / (1 + NIR + 6*RED + -7.5*BLUE)`.
parameters:
- name: red
description: Value from the red band.
schema:
type: number
- name: blue
description: Value from the blue band.
schema:
type: number
- name: nir
description: Value from the near infrared band.
schema:
type: number
returns:
description: Computed EVI.
schema:
type: number
process_graph:
sub:
process_id: subtract
arguments:
x:
from_parameter: nir
y:
from_parameter: red
p1:
process_id: multiply
arguments:
x: 6
y:
from_parameter: red
p2:
process_id: multiply
arguments:
x: -7.5
y:
from_parameter: blue
sum:
process_id: sum
arguments:
data:
- 1
- from_parameter: nir
- from_node: p1
- from_node: p2
div:
process_id: divide
arguments:
x:
from_node: sub
y:
from_node: sum
p3:
process_id: multiply
arguments:
x: 2.5
y:
from_node: div
result: true
securitySchemes:
Bearer:
type: http
scheme: bearer
bearerFormat: >-
The Bearer Token MUST consist of the authentication method, a provider
ID (if available) and the token itself. All separated by a forward slash
`/`. Examples (replace `TOKEN` with the actual access token): (1) Basic
authentication (no provider ID available): `basic//TOKEN` (2) OpenID
Connect (provider ID is `ms`): `oidc/ms/TOKEN`. For OpenID Connect, the
provider ID corresponds to the value specified for `id` for each
provider in `GET /credentials/oidc`.
Basic:
type: http
scheme: basic
Listing B.1